Set To Midposition; Undo Midposition; Convergence Mid; Undo Convergence Mid (Position) - Runco DTV-1101 Owner's Operating Manual

Set to Midposition

This item is password protected. Highlight 'Set to Midposition' with the
control disk and press ENTER to set all settings to their midposition.
A confirmation menu will be displayed first.
ENTER will set all settings to their midposition. EXIT will cancel the
operation to set all settings to their midposition.

Undo Midposition

When 'Set to Midposition' is selected, all settings are set to their
midposition. To cancel this action, select 'Undo Midposition' by
pushing the control disk up or down and press ENTER. 'Undo
Midposition' is displayed in the Service Mode instead of 'Set to
Midposition' when the latter is pressed.
An undo is possible as long as the projector is playing on the same
source (= same adjustment block) even when some adjustments,
such as geometry or convergence, are already readjusted. When
undo is pressed, all settings are reset to the previous settings.

Convergence Mid

This item is password protected. Highlight 'Convergence Mid' with the
control disk and press ENTER to set all convergence settings to their
midposition. A confirmation screen will be displayed first.
ENTER sets the convergence settings to their midposition. EXIT
cancels the procedure to set the convergence settings to their
midposition.

Undo Convergence Mid (Position)

When 'Convergence Mid' is activated, all convergence settings are
set to their midposition. To cancel this action, select 'Undo Conver-
gence Mid' by pushing the control disk up or down and press ENTER.
'Undo Convergence Mid' is displayed in the service mode menu in-
stead of 'Convergence Mid' when this latter is activated.
An 'undo' is possible:
• as long as the projector is operating on the same source (= same
adjustment block) even when some convergence adjustments are
already readjusted
AND
• 'Set to Midposition' is not yet selected.
When undo is pressed, all convergence settings are reset to the
previous settings.
Service Mode
SERVICE MODE
IDENTIFICATION
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
CHANGE PASSWORD
CHANGE LANGUAGE
RUN TIME
SET TO MIDPOSITION
CONVERGENCE MID
DYNAMIC ASTIGMATISM
MORE...
Select with or
then <ENTER>
<EXIT> to return. SET TO MIDPOSITION
All settings
in current block
will be overwritten!
<ENTER> to confirm
<EXIT> to cancel
SERVICE MODE
IDENTIFICATION
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
CHANGE PASSWORD
CHANGE LANGUAGE
RUN TIME
UNDO MIDPOSITION
CONVERGENCE MID
DYNAMIC ASTIGMATISM
MORE...
Select with or
then <ENTER>
<EXIT> to return
SERVICE MODE
IDENTIFICATION
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
CHANGE PASSWORD
CHANGE LANGUAGE
RUN TIME
SET TO MIDPOSITION
CONVERGENCE MID
DYNAMIC ASTIGMATISM
MORE...
Select with or
then <ENTER>
<EXIT> to return.
CONVERGENCE MID
All settings
in current block
will be overwritten!
<ENTER> to confirm
<EXIT> to cancel
SERVICE MODE
IDENTIFICATION
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
CHANGE PASSWORD
CHANGE LANGUAGE
RUN TIME
SET TO MIDPOSITION
UNDO CONVERGENCE MID
DYNAMIC ASTIGMATISM
MORE...
Select with or
then <ENTER>
<EXIT> to return
7-5