Table of Contents
Advertisement
Quick Set-up Guide
Connection Examples
AC Power In
(100-240 VAC)
RGB Input
(from Controller
to Projector)
COMLINK OUT
12V FUSE
RS-232 IN
V
H
MASK
SCREEN
12V TRIGGER
Automation
System
While there are many different ways to connect your source equipment to your Controller, the examples shown above are
the most common and are recommended by Runco.
• COMPOSITE VIDEO INPUT: Composite video is the most common type of signal used, but is also the lowest in picture
quality. Many sources have outputs that are limited to Composite video, such as some VCR's and camcorders. Others, such
as laser disc players, actually produce slightly better results when using Composite video. While the Controller has an excel-
lent decoder for Composite video, it is recommended that Composite video be used only if necessary.
• S-VIDEO INPUT: S-Video is the second-best type of signal that can be used, but is MUCH better than Composite video.
Using such sources as satellite receivers, high-quality VCRs and DVD players (with no Component output) will produce a
MUCH cleaner and sharper signal. Decoder artifacts that are associated with Composite video (dot crawl and 'rainbows') are
non-existent when using S-Video.
• COMPONENT INPUT: Component video is the best type of signal that can be used. The most common sources that use
Component outputs are DVD players, and it is highly recommended that Component be used when possible. Component
video goes one step beyond S-Video in picture quality; chroma (color) information is more resolved and the overall picture
appears more well-defined.
• RGB/COMPONENT PASSTHRU: This port is where all high-resolution signals (such as DTV decoders and progressive
DVD players) must be input. The signal type can be either RGBHV or Component and is not processed by the Controller.
Computer signals must be input directly to the Projector via the 15-pin VGA connector labeled 'COMPUTER'.
DVI-I IN
PC INPUT
ComLink In
Connect the ComLink cable from the PFP
Controller to theDVI-I IN on the Projector
RGB OUTPUT
VIDEO INPUTS
B
G
R
RGB/COMPONENT
Y
Pr
DTV decoder,
DVD Player
Progressive DVD
Sattelite
receiver or
SVHS player
CAUTION
!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER. NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE CENTER.
AC 100-240V, 50/60 Hz, 15W
WARNING:
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
Pb
S-VIDEO
COMPOSITE
VCR, Laser
disc player,
camcorders
21
VX-5000ci Projector
RUNCO INTERNATIONAL
UNION CITY, CA
MADE IN USA
Controller
MADE IN USA
Advertisement
Table of Contents
