Table of Contents
Advertisement
Connections
Start Up with Full White Image.
If no action is taken, a white image will be displayed for 20 minutes.
This white image will be shifted on the faceplate of the CRT to avoid
a CRT burn in. During this warm-up period, it is possible to interrupt
this white image projection by pressing the EXIT key.
If EXIT is pressed, the remaining warm-up period will be skipped.
During the warm-up period, every 30 seconds a text box with the
remaining time will be displayed on the screen for 2 seconds. This text
box will be displayed every time in another place.
Signal Input Connection to the Projector
- RGB/Component
Port No
Projector input
3
RGB
1
4/5
RGB/Component
3-2
PORT 4/5
(
RGB + HV)
Comp/H sync V sync
. .
PORT 6
PORT 3
REMOTE
COMMUNICATION
. . .
R
3
4
5
1
Input signal : R, G and B with automatic sync detection
between seperate sync (separate composite sync or
with separate Horizontal and Vertical sync) or sync on
green (composite sync).
PROJECTOR MODE
GREEN: operational
RED: stand-by
G
B
Advertisement
Table of Contents
