Location Of Cooker - Rangemaster 110 Gas User's Manual & Installation Instructions

Table of Contents

Advertisement

Check the appliance is electrically safe and gas sound when you have nished.

Location of Cooker

The cooker may be installed in a kitchen/kitchen diner but
NOT in a room containing a bath or shower.
This appliance is designed for domestic cooking only. Use
for any other purpose could invalidate any warranty or
liability claim.
Note: An appliance for use on LPG must not be installed
in a room or internal space below ground level, e.g. in a
basement.
You will need the following equipment to complete the
cooker installation satisfactorily:
Stability bracket: If the cooker is to be supplied with
gas through a flexible hose, a stability bracket or chain
MUST be fitted.
These are not supplied with the cooker but are
available at most builders' merchants.
Gas pressure tester/manometer.
Flexible gas hose: Must be in accordance with the
relevant standards.
Multimeter: For electrical checks.
You will also need the following tools:
1.
Electric drill
2.
Masonry drill bit (only required if tting the cooker on a
stone or concrete oor)
3.
Wall plugs (only required if tting the cooker on a stone
or concrete oor)
4.
Steel tape measure
5.
Cross head screwdriver
6.
Flat head screwdriver
7.
Spirit level
8.
Pencil
9.
Adjustable spanner
10.
Screws for tting stability bracket
11.
13 mm spanner (or socket wrench)
INSTALLATION
Checking the Parts:
3 pan supports
ArtNo.000-0001 90 Pan supports
Grill pan & trivet
ArtNo.330-0002 - Grill pan w handle
Handyrack
ArtNo.324-0003 Handyrack
Plinth
22
Griddle
4 at shelves
Roasting tin
ArtNo.324-0004 Roasting tin

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents