NETGEAR WNR612 - Wireless-N 150 Router Installation Manual

Basic Wireless Router
Package Contents:
Power/Test LED
Push 'N' Connect Security LED
Wireless LED
Internet LED
LAN Ports 1 & 2 LED
Wireless Router
(front)
Ethernet Cable
Power Adapter
Installation Guide
Step 1:
Connect your modem.
CAUTION:
MAKE SURE YOUR MODEM IS
TURNED OFF OR UNPLUGGED
BEFORE STARTING THE
INSTALLATION.
(not included)
Ethernet cable
DSL or Cable
Modem
Step 4:
Power on your modem.
Wait until your modem cycles on
(approximately 2 minutes).
Note: If you have a battery-backed modem,
press the reset button. (In some cases, you may
need to remove, then re-insert, the battery to recycle
your modem.)
Step 2:
Connect your router.
Wireless Router
(back)
(not included)
Step 5:
Power on your router.
Wait until the power LED
turns solid green.
Step 3:
Connect your computer.
Laptop or Desktop
Computer
Step 6:
Configure settings.
Open a browser, such as
Internet Explorer, and enter
www.routerlogin.net
to complete the setup.