Viewing Statistics - NETGEAR WNR612v2 User Manual

Wireless-N 150 Router WNR612v2 User Manual
Table 3. Router Status Screen Fields (Continued)
Field
LAN Port MAC Address
IP Address
DHCP
IP Subnet Mask This field displays the IP subnet mask used by the local (LAN) port of the
Wireless Port Name (SSID)
Region
Channel
Wireless AP
Broadcast
Name
Wi-Fi Protected
Setup

Viewing Statistics

On the Router Status screen, click the Show Statistics button to display wireless router
usage statistics, as shown in the following screen.
The Show Statistics screen displays the following statistics:
Table 4. Router Statistics Fields
Field
WAN, LAN, or WLAN
Status
Description
This field displays the Ethernet MAC address being used by the local (LAN)
port of the wireless router.
This field displays the IP address being used by the local (LAN) port of the
wireless router. The default is 192.168.0.1.
If Off, the wireless router does not assign IP addresses to PCs on the LAN.
If On, the wireless router does assign IP addresses to PCs on the LAN.
wireless router. The default is 255.255.255.0.
The service set ID, also known as the wireless network name for WLAN1.
The country where the unit is set up for use.
The current channel, which determines the operating frequency.
Indicates if the access point feature is enabled for WLAN1. If disabled, the
Wireless LED on the front panel is off.
Indicates if the wireless router is configured to broadcast its SSID for
WLAN1.
Indicates whether the router's PIN is enabled and whether the router is
configured for WPS (Wi-Fi Protected Setup). For more information, see
Using Push 'N' Connect (WPS) to Configure Your Wireless Network
page 20.
Description
The statistics for the WAN (Internet), LAN (local), and wireless LAN (WLAN)
ports. For each port, the screen displays the following:
The link status of the port.
Chapter 5: Maintenance
on
| 51