NETGEAR WNR612v2 User Manual page 84

Use a sharp object such as a pen or a paper clip to press and hold the restore factory
2.
settings button for about 5 seconds, until the Power light begins to blink.
Release the restore factory settings button, and wait for the router to restart, and for the
3.
Power light to stop blinking and become solid green.
The factory default settings will be restored so that you can access the router from your
Web browser using the factory defaults.
If the wireless router fails to restart, or the Power light continues to blink or turns solid amber,
the unit might be defective. If the error persists, you might have a hardware problem and
should contact Technical Support at http://www.netgear.com/support.
84 | Chapter 7: Troubleshooting
Wireless-N 150 Router WNR612v2 User Manual