NETGEAR WNR612v2 User Manual page 16

To view or manually configure the wireless settings:
Log in to the wireless router as described in
1.
Select Wireless Settings from the main menu:
2.
The settings for this screen are explained in
Select the region in which the wireless router will operate.
3.
For initial configuration and test, leave the other settings unchanged.
4.
To save your changes, click Apply.
5.
Configure and test your computers for wireless connectivity.
6.
Set up your wireless computers with the same SSID and wireless security settings as
your wireless router. Check that they have a wireless link and are able to obtain an IP
address by DHCP from the wireless router. If there is interference, adjust the channel.
Table 2. Wireless Settings
Settings
Region
Wireless Enable SSID
Network Broadcast
Enable Wireless
Isolation
Name (SSID)
16 | Chapter 2: Wireless Configuration
Wireless-N 150 Router WNR612v2 User Manual
Logging In to Your Router
Table 2.
Description
The location where the wireless router is used.
If this check box is selected, the SSID is broadcast in the selected
channel.
If this check box is selected, computers will not be able to connect
wirelessly to the wireless router.
The SSID is also known as the wireless network name. Enter a
32-character (maximum) name in this field. This field is case-sensitive.
When there is more than one wireless network, SSIDs provide a means
for separating the traffic. To join a network, a wireless computer or
device must use the SSID.
on page 9.