Table of Contents
Advertisement
Positioning Your Spa
Because your Santina spa is portable, you can locate it just about anywhere you wish—on a deck, patio, or even indoors.
Be sure to position it above ground in an area with good drainage and on a level, continuous surface which can support the
weight of the spa when filled with water and people; this weight is approximately 4203 lbs. You must also provide access
to the spa's equipment for service and general maintenance.
MINIMUM SERVICE ACCESS
EQUIPMENT
DOOR
32"
Electrical Requirements
Your Santina, as it comes from the factory, requires a 230
VAC 50 AMP 4-wire grounded type electrical service and
must be in a separate circuit having no other appliance
connected in that circuit. If you do not have this kind of
circuit, a qualified electrician should be used to install the
necessary wiring. Inadequately sized wiring may cause a
voltage drop which could cause the unit to malfunction and
result in permanent damage to the spa's electrical system.
4
INSTALLATION
50"
The circuit must also have a ground wire in order to take
advantage of the designed-in safety features of the spa. A
bond wire must also be used. Bond according to procedure
described on the next page.
Caution: Without proper grounding and bonding, a
system malfunction may cause fatal shock.
Hide quick links:
Advertisement
Table of Contents
