Advertisement
Safety Instructions
Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that
they also receive this instruction booklet.
Always make sure that you are connecting to the proper voltage, and that the line voltage you are
connecting to is not higher than that stated on the decal or rear panel of the fixture.
This product is intended for indoor use only!
To prevent risk of fire or shock, do not expose fixture to rain or moisture.
Maximum ambient temperature (Ta) is 104°F (40°C). Do not operate fixture at temperatures higher
than this.
In the event of a serious operating problem, stop using the unit immediately. Never try to repair the
unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please
contact the nearest authorized technical assistance center. Always use the same type spare parts.
Never connect the device to a dimmer pack.
Make sure the power cord is never crimped or damaged.
Never disconnect the power cord by pulling or tugging on the cord.
Note!
Maximum recommended serial data link distance: 500 meters (1640 ft.)
Note!
Maximum recommended number of fixtures on a serial data link: 32 fixtures
Caution!
There are no user serviceable parts inside the unit. Do not open the housing or
attempt any repairs yourself. In the unlikely event your unit may require service,
please contact CHAUVET at: 954-929-1115.
2. I
NTRODUCTION
Features
Transmit/receive up to 512 DMX channels wirelessly
Control up to 9 universes or 4,608 DMX channels (requires multiple units)
Use with any universal DMX-512 controller
27 user-selectable UHF frequencies (902MHz – 928MHz)
Functions as transmitter or receiver
Self-contained unit with no setup required
Requires two units for operation (per universe)
FCC compliant
D-Fi™ PLUS User Manual
Please read these instructions carefully, which includes important
information about the installation, usage and maintenance of this product?
2
4/27/2009 11:39 AM
Advertisement
