EFORE EGIN What is included 1 x DJ Squeeze™ II (DMX-150SQ) Power cord with plug ELC3 250w lamp Warranty Card Unpacking Instructions Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition.
L AMP I NST AL L AT I O N DMX-150SQ Lamp Installation Remove both thumbscrews located on the front of the fixture next to the focus lens and remove the lamp face plate.
Note! Clamp is sold separately. Safety cables should always be used. Never mount in places where the fixture will be exposed Hanging Bracket to rain, high humidity, extreme temperature changes or restricted ventilation. 2005-05-05/09:34 DMX-150SQ User Manual...
The Stand Alone mode is activated automatically when the fixture is absent of DMX signal or a controller is not connected. The DMX-150SQ will run through its built in programs as it listens to the sound. The optional CH-X wired controller also provides a blackout function.
Page 9
9 – (8) = 1, Turn ON Dip # 4 Address 233 1 – (1) = 0, Turn ON Dip # 1 You will most likely use the first available number which maybe number 1. This number was selected for example purposes. 2005-05-05/09:34 DMX-150SQ User Manual...
XLR male to female connectors. The shield connection is pin 1, while pin 2 is Data Negative (S-) and pin 3 is Data positive (S+). CHAUVET carries 3-pin XLR DMX compliant cables, DMX-10 (33’), DMX-4.5 (15’) and DMX-1.5 (5’)
Clean with soft cloth using normal glass cleaning fluid. - Always dry the parts carefully. - Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days. 2005-05-05/09:34 DMX-150SQ User Manual...
Package must be clearly labeled with a Return Merchandise Authorization Number (RA #). Products returned without an RA # will be refused. Call CHAUVET and request RA # prior to shipping the fixture. Be prepared to provide the model number, serial number and a brief description of the cause for the return.
Remote does not work Make sure connector is firmly connected to device Stand alone mode All CHAUVET lighting fixtures featuring stand-alone functions do not require additional settings, simply power the fixture and it will automatically enter into this mode ...