Table of Contents
Advertisement
Assembly
!
Disconnect power to the
machine when perform-
ing any maintenance or
assembly. Failure to do
this may result in serious
personal injury.
Some metal parts may
have sharp edges on
them
formed. Please examine
the edges of all metal
parts
them. Failure to do so
could result in injury.
-10-
Keep clothing rolled up
and out of the way of
machinery
and
keep
hair pulled back.
Wear safety glasses dur-
ing the entire assembly
process. Failure to com-
ply may result in serious
personal injury.
after
they
before
handling
The assembly of the Model H3390 Wet Tile Saw
is straightforward and can be completed in a rela-
tively short period of time.
To assemble the saw:
1.
Assemble the two stand brackets using (2)
M8-1.25 x 50 hex bolts and (2) M8-1.25 lock
nuts as shown in Figure 4 . DO NOT over-
tighten.
Figure 4. Assembling the stand brackets.
2.
Attach the casters to the mounting locations
on the stand using M6-1.0 x 40 hex bolts, M6
flat washers, and M6-1.0 hex nuts as shown
in Figure 5 .
are
Figure 5. Attaching the casters.
H3390 Wet Tile Saw
Advertisement
Table of Contents
