Enabling or Disabling Handsfree Mode
Handsfree mode is for analog telephone users who are using headsets.
IP phone users should instead choose the Auto Off-Hook Preference.
NOTE
See "Changing Automatic Off Hook Preference" on page 27 for more
information.
With handsfree mode enabled, you can place or receive calls by using a
headset or the speakerphone, and you can stay off-hook and dial tone will not
be played. By default, handsfree mode is disabled. You can enable handsfree
mode by doing the following:
Step 1
Step 2
Step 3
Step 4
Asterisk
indicates
that this is
the current
mode.
Step 5
32
Press the Options button
and then
.
Scroll to Handsfree Mode or press 6 on the keypad until 6.
Handsfree Mode is highlighted.
Press the Edit soft key.
Available options for Handsfree mode are Disabled and
Enabled. Scroll to the desired option and then press the OK
soft key (see below).
Press the Done soft key to exit.
Options
, followed by your password