The Quickinstall Menu - GE Security DVMRe Simplex User Manual

Activate The Ethernet Password
1. Enter the new password using the Number buttons.
2. Highlight OK, then press the Enter button.
3. Re-enter the password.
4. Highlight OK, then press the Enter button. The user will be prompted, indicating if the password was
entered correctly and changed.
Deactivate The Ethernet Password
To return the unit to No Ethernet Password Protection,
enter the Ethernet Access Reset Password in the
password box shown above.
The DDNS Password
The DDNS password enables the DVMRe Simplex to contact
the Domain Name Server in order to provide IP to Domain
Name translation. You must obtain this number by calling
you Domain Name Service. By default this password is
2222. This password is only used when Name Service in
the Ethernet Settings Menu is set to GnuDIP.

3.21 The QuickInstall Menu

QuickInstall Menu Overview
After installation is complete, it is strongly recommended that, as
a minimum, the items in the QuickInstall menu be configured
before the unit is used.
All items located in the QuickInstall menu are also found in the
Main menu. These items are provided in the separate QuickInstall
menu as a convenience for the installer.
Use the following table to find detailed information about configuring
specific items from the QuickInstall menu.
QuickInstall Menu Item
Change the time
Change the date
Edit Camera Titles
Camera Disable
Record Quality
Installer Password
Auto Disable Now
0150-0239D
Primary Menu Location
Main Menu Time/Date
Main Menu Time/Date
Main Menu Camera Setup
Main Menu Camera Setup
Main Menu Record
Main Menu Passwords
Main Menu Camera Setup
Auto Disable Now
60
Ethernet Access Reset Password
1 1 1 1
Change the time
Change the date
Edit Camera Titles
Camera Disable
Record Quality
Installer Password
Auto Disable Now
Set Time
Set Date
Camera Titles
Camera Disable
Record Quality
Installer Password
Camera Disable
GE Security DVMRe Simplex
Section In
Manual
3.8
3.8
3.14
3.14
3.10
3.20
3.14