FujiFilm Drypix 5000 Operation Manual page 49

Utility Operation
4 On the input modality setting screen that appears, use the
buttons to select an input device. Press then the
[Fig. 4.14] Input Modality Setting Screen
The individual device connected to the DICOM network is given a proper name called
AE title.
Use the
A test pattern will be printed based on the imaging conditions of the selected device.
5 The output parameter select screen appears as follows. Select a desired number of
frames (1, 2, 4, 6, 8 or 12) and lookup table curve (LUT nos. from LUT1 to LUT8).
Press then the
[Fig. 4.15] Output Parameter Select Screen
006-240-20 2004.03
or button to select one device registered to DRYPIX5000.
button.
and
button.
"default" is the AE title name
registered at the time of shipment
from factory.
(Press the or
button, and select the AE title
other than the default.)
1
2
3
4
5
6
7
4-9