FujiFilm Revoria Press E1136 Reference Manual
  1. Manuals
  2. Brands
  3. FujiFilm Manuals
  4. All in One Printer
  5. Revoria Press E1136
  6. Reference manual

FujiFilm Revoria Press E1136 Reference Manual

Hide thumbs Also See for Revoria Press E1136:
Table of Contents

Advertisement

Quick Links

Revoria Press
E1136/E1125/E1110/E1100
Reference Guide
Optional Units
January 2022 GM1074E2-2 Edition1
FUJIFILM Business Innovation Corp.

Advertisement

Table of Contents
loading

Related Manuals for FujiFilm Revoria Press E1136

Summary of Contents for FujiFilm Revoria Press E1136

  • Page 1 Revoria Press E1136/E1125/E1110/E1100 Reference Guide Optional Units January 2022 GM1074E2-2 Edition1 FUJIFILM Business Innovation Corp.

  • Page 2: Table Of Contents

    Contents High Capacity Feeder C1-D2 Loading Paper;Paper Jams High Capacity Feeder B1-S/C3-DS Loading Paper;Paper Jams;Cleaning Machine Air Suction Feeder Loading Paper Interface Decurler Module Curl Correction;Paper Jams Inserter Loading Paper;Paper Jams High Capacity Stacker Outputting Paper;Paper Jams Crease / Two-Sided Trimmer Waste Container;Paper Jams Folder Unit Paper Jams...
  • Page 3 Preface A guide describing the operations for optional units, such as the Finisher. Refer  • Descriptions for the following optional products are provided in different guides. - Offset catch tray, Simple catch tray: 'Reference Guide- Main Unit' - Print / scan function-related products: 'Reference Guide - Operations' - Print server and related products: Manual included in the product - IC card reader: Official site of our company •...

  • Page 4: High Capacity Feeder

    High Capacity Feeder C1-D2 Device Components / Caution Labels Component Function Right Cover Open this cover to clear paper jams. High Capacity Tray (Paper Tray 6) Load paper here. High Capacity Tray (Paper Tray 7) Load paper here. Bypass Tray (Paper Tray 5) Refer ...
  • Page 5 Loading Paper Images are printed on the face side of the loaded paper. Pull out the Paper Tray toward you until it stops. Remove any paper remaining in the Paper Tray. If changing the Paper Size, adjust the guide position. Remove the 2 screws for the guide, and remove the guide from the Paper Tray.
  • Page 6 Paper Jams If paper is jammed, the machine stops and an alarm sounds. Follow the instructions displayed on the screen to remove the jammed paper. Gently remove the paper being careful not to tear it. If paper is torn while it is being removed from the machine, remove all the torn pieces making sure that none remain inside the machine.
  • Page 7 ■Paper Jams at [1b] Open lever [1b] to the right ( 1 ), turn knob [1c] clock- wise ( 2 ) and remove the jammed paper ( 3 ). Return lever [1b]. ■Paper Jams at [1d] Open lever [1d] upward ( 1 ) and remove the jammed paper ( 2 ).

  • Page 8: High Capacity Feeder B1-S/C3-Ds

    High Capacity Feeder B1-S/C3-DS Device Components / Caution Labels B1-S C3-DS Optional Units...
  • Page 9 Component Function Bypass Tray (Paper Tray 5) Load paper here. Error Indicator When paper jam occurs, the indicator is turned on. When the priority device indicator (top lamp) blinks, first of all perform the paper jam operation. Right Cover Open this cover to clear paper jams. Remaining Volume Indicator When the Paper Tray is in operation, the top lamp is turned on.
  • Page 10 Main Specifications Item Specification Paper size Standard size SRA3 (320 x 450 mm), 12.6 x 19.2" (320 x 488 mm) Postcard (100 x 148 mm) Custom size (mm) Width 100 to 330 Length 148 to 488 Paper weight (g/m B1-S Bypass Tray Uncoated 52 to 253...
  • Page 11 Loading Paper Loading to High Capacity Tray Images are printed on the face side of the loaded paper. Important  Do not load paper above the maximum fill line. It may cause paper jams or machine malfunction. Note  • If the amount of the loaded paper is 100 sheets or less, the guides apply more pressure to the paper. It may cause the paper to be distorted, leading to paper jams.
  • Page 12 Refer  "Changing Paper Feeding Accuracy" (p.14) Push in the Paper Tray. Postcard Setting Attach Postcard Kit to the Paper Tray to load paper with the width of 100 to 181 mm. Pull out the Paper Tray toward you until it stops. Remove any paper remaining in the Paper Tray.
  • Page 13 Load remaining sheets with the printed side facing up, and align the paper edges in the direction of the arrow ( Adjust the short-side paper guide to the correct pa- per size ( To leave a space, pinch the paper guide grip to move. To narrow, push the paper guide to move.
  • Page 14 Changing Paper Feeding Accuracy Enabling this function may improve print displacement when images are skewed (print position is displaced) even though plain paper with the paper weight of 220 g/m or less is correctly load- Note  • If this function is enabled when paper other than thick paper and plain paper is used, the machine cannot feed the paper properly, resulting in paper jams.
  • Page 15 Loading to Bypass Tray Images are printed on the face side of the loaded paper. Important  Do not load paper above the maximum fill line. It may cause paper jams or machine malfunction. Note  • If the paper guide width is narrower or wider than the paper, it may cause paper jams. •...
  • Page 16 Fan the paper well and insert it along the paper guide all the way until it touches the back, with the printed side facing up. Secure the 4 screws of the paper guide. Special Media Setting ■Hole Punched Paper Orientation: Place the holes of paper on the right side when you face the front side of machine. ■Precut Tab Orientation: Place the tabs of paper on the left side when you face the front side of machine.
  • Page 17 Paper Jams Note  The error indicator at the top of the machine is turned on. When the priority device indicator (top lamp) blinks, first of all perform the paper jam operation. If paper is jammed, the machine stops and an alarm sounds. Follow the instructions displayed on the screen to remove the jammed paper.
  • Page 18 ■When Indicator E6 is Turned on (B1-S), when Indicator E7 is Turned on (C3-DS) Pull out the Paper Tray 6 (or 7) toward you until it stops. Note  Confirm that no paper is jammed inside the Right Cover before pulling it out. Remove the jammed paper.
  • Page 19 ■When Indicator E3 is Turned on Open lever [1b] to the right ( 1 ), turn knob [1c] clock- wise ( 2 ), and remove the jammed paper ( 3 ). Return lever [1b]. ■When Indicator E4 is Turned on Open lever [1a] to the right ( 1 ), turn knob [1c] clock- wise ( 2 ), and remove the jammed paper ( 3 ).
  • Page 20 Cleaning Machine • When you clean machine products, use the cleaning materials designated in every step. • To wipe with a wet cloth, use the soft cloth tightly wrung out of water. If the parts are not com- pletely dry, the machine may malfunction. •...
  • Page 21 Wipe the surface of roller 1 with the soft cloth tightly wrung out of water. Reinstall roller 1. Note  Make sure that roller 1 is installed in the holder completely. Remove roller 2 by picking up the both ends of its pin. Wipe the surface of roller 2.
  • Page 22 Cleaning the Paper Feeding Unit in the High Capacity Tray Note  • Do not press a roller during the cleaning, otherwise the roller may drop off. • Non-woven dry type fabric can be used effectively for cleaning paper dust. Open the Right Cover. Open lever [1a] to the right.
  • Page 23 Open lever [1d] upward. Clean behind lever [1d]. Wipe the roller surface with the soft cloth tightly wrung out of water. Lightly wipe paper dust off on the surface of the paper path. Return lever [1d]. Paper path surface Roller Close the cover.

  • Page 24: Air Suction Feeder

    Air Suction Feeder Device Components Component Function Bypass Tray (Paper Tray 5) Load paper here. Error Indicator When paper jam occurs, the indicator is turned on. When the priority device indicator (top lamp) blinks, first of all perform the paper jam operation. Right Cover Open this cover to clear paper jams.
  • Page 25 Main Specifications Item Specification Paper size Paper size Standard size SRA3 (320 x 450 mm), Paper weight 12.6 x 19.2" (320 x 488 mm) Postcard (100 x 148 mm) Custom size (mm) Width 100 to 330 Length 148 to 488 Paper weight (g/m Uncoated 52 to 350...
  • Page 26 Loading Paper Important  Do not load paper above the maximum fill line. It may cause paper jams or machine malfunction. Note  • Position the guides correctly to match the paper size. Incorrectly positioned guides may cause misfeeding and paper jams. •...
  • Page 27 Postcard Setting Attach Postcard Kit for Air Suction Feeder to the Paper Tray to load paper with the width of 100 to 181 mm. Pull out the Paper Tray toward you until it stops. Remove any paper remaining in the Paper Tray. Remove the shutters.
  • Page 28 Load remaining sheets with the printed side facing up, and align the paper edges in the direction of the arrow ( Adjust the short-side paper guide to the correct pa- per size ( To leave a space, pinch the paper guide grip to move. To narrow, push the paper guide to move.

  • Page 29: Interface Decurler Module

    Interface Decurler Module Device Components Component Function Error Indicator When paper jam occurs, the indicator is turned on. When the indicator blinks, first of all perform the paper jam operation. Curl correction button Press the button to correct paper curl. This curl correction function can be used during printing.
  • Page 30 Curl Correction The curl correction button is used to correct paper curl caused by heat and/or pressure. The curl correction button can be operated regardless of the machine state when the machine is Note  • This curl correction function can be used during printing. Fine correction according to the paper properties can be made from control panel.
  • Page 31 Operations and Functions of Curl Correction Press the AUTO button to enter the [AUTO] mode. Indicator Mode Function AUTO Curl correction is automatically performed. It is recommended to use this mode basically. Optimum curl correction is per- formed according to the paper size and output direction.
  • Page 32 Paper Jams Note  The error indicator at the top of the machine is turned on. When the indicator blinks, first of all perform the pa- per jam operation. If paper is jammed, the machine stops and an alarm sounds. Follow the instructions displayed on the screen to remove the jammed paper.

  • Page 33: Inserter

    Inserter Device Components Component Function Error Indicator When paper jam occurs, the indicator is turned on. When the priority device indicator (top lamp) blinks, first of all perform the paper jam operation. Curl correction button Use this button when Interface Decurler Module is not installed or curl cannot be corrected even if the highest correction (or lowest correction) of Interface De- curler Module is performed.
  • Page 34 Main Specifications Item Specification Paper size Standard size SRA3 (320 x 450 mm), 12.6 x 19.2" (320 x 488 mm) Note  Can be used by inputting the size. Custom size (mm) Width 182 to 330 Length 148 to 488 Paper weight (g/m 52 to 350 Note ...
  • Page 35 Loading Paper Load paper (blank paper or printed paper) to be used as an interleaf or cover. Inserter Tray is used to load paper used as an interleaf or cover, and print cannot be performed. Note  • After removing all the paper from the Tray, and then load the paper again together with the paper you want to add.
  • Page 36 Paper Jams Note  The error indicator at the top of the machine is turned on. When the priority device indicator (top lamp) blinks, first of all perform the paper jam operation. If paper is jammed, the machine stops and an alarm sounds. Follow the instructions displayed on the screen to remove the jammed paper.
  • Page 37 If you have difficulty in removing the papers, open lever [1c] to the right ( 1 ), turn knob [1b] counterclockwise ( 2 ), and remove the jammed paper ( 3 ). Return lever [1c]. Close the cover. ■When Indicator E3 is Turned on Open the Cover.

  • Page 38: High Capacity Stacker

    High Capacity Stacker Device Components Component Function Error Indicator When paper jam occurs, the indicator is turned on. When the priority device indicator (top lamp) blinks, first of all perform the pa- per jam operation. Sample button Press the button to output a sample to the Top Output Tray. Paper eject button Press the button to stop printing and take out outputs.
  • Page 39 Main Specifications Item Specification Tray capacity Top Output Tray (sheets) Stacker Tray 5,000 Paper size Top Output Tray Standard size SRA3 (320 x 450 mm), 12.6 x 19.2" (320 x 488 mm) Postcard (100 x 148 mm) Custom size Width 100 to 330 (mm) Length...
  • Page 40 Outputting Paper Top Output Tray Banner Print Extension Kit Long paper can be loaded without its lead edge sticking out. Paper size (mm) Tray capacity (sheets) Width: 210 to 330 Length: 489 to 660 Important  When paper exceeding the tray capacity is loaded, the Extension Tray may get broken. Note ...
  • Page 41 Note  As holding the U-shaped bar with a hand, insert the fixing devices firmly, and check that the wires will not come off from the U-shaped bar. Adjust the wire positions according to the size of paper to be output. Note ...
  • Page 42 Paper Jams Note  The error indicator at the top of the machine is turned on. When the priority device indicator (top lamp) blinks, first of all perform the paper jam operation. If paper is jammed, the machine stops and an alarm sounds. Follow the instructions displayed on the screen to remove the jammed paper.
  • Page 43 ■When Indicator E3 is Turned on Open the front upper cover. Open lever [1b] upward ( 1 ), turn knob [1a] counter- clockwise ( 2 ), and remove the jammed paper ( 3 ). Return lever [1b]. Open lever [2b] upward ( 1 ), turn knob [2c] counter- clockwise ( 2 ), and remove the jammed paper ( 3 ).
  • Page 44 ■When Indicator E6 is Turned on Press the paper eject button. When lock is released, open the front lower cover. Pull out the stacker cart slowly and remove the jammed paper. Return the stacker cart slowly. Close the cover. ■When Indicator E7 is Turned on Remove the jammed paper that sticks out from the exit of the Top Output Tray.
  • Page 45 ■When Indicator E8 is Turned on Open the front upper cover. Open lever [3b] upward ( 1 ), turn knob [3a] clockwise ( 2 ), and remove the jammed paper ( 3 ). Return lever [3b]. Close the cover. Check the curl direction of the jammed paper and correct the curl. Refer ...

  • Page 46: Crease / Two-Sided Trimmer

    Crease / Two-Sided Trimmer Device Components / Caution Labels Component Function Error Indicator When paper jam occurs, the indicator is turned on. When the priority device indicator (top lamp) blinks, first of all perform the paper jam operation. Waste full indicator When cut pieces need to be disposed, the indicator is turned on.
  • Page 47 Main Specifications Item Specification Two-sided Trim Paper size Standard size SRA3 (320 x 450 mm), 12.6 x 19.2" (320 x 488 mm) A4, Letter (8.5 x 11") Custom size Width 194 to 330 (mm) Length 210 to 488 (Cutting and crease: up to 386) Paper weight (g/m Uncoated 52 to 350...
  • Page 48 Cutting and Crease Area 210 to 488 mm 386 mm or less (trim and crease) 194 to 330 mm (trim) Trim 182 to 330 mm (crease) Feed direction a: 12 mm or more A=B: 6 to 25 mm b - e: 25 mm or more Crease Printing is not possible when less than 45 mm from the front edge.
  • Page 49 Waste Container When cut pieces need to be disposed, the waste full indicator is turned on. When it is turned on, dispose cut pieces. Note  • Cut pieces can be disposed even during printing. • When cut pieces in the waste container become full, the waste full indicator changes from ON to blinking. Open the lower cover.
  • Page 50 Paper Jams Note  The error indicator at the top of the machine is turned on. When the priority device indicator (top lamp) blinks, first of all perform the paper jam operation. If paper is jammed, the machine stops and an alarm sounds. Follow the instructions displayed on the screen to remove the jammed paper.

  • Page 51: When Indicator E2 Is Turned On

    ■When Indicator E2 is Turned on Turn knob [2] counterclockwise and align the marks. Open lever [1a] downward ( 1 ) and open lever [1b] downward ( 2 ). Turn knob [1c] clockwise ( 1 ) and remove the jammed paper ( 2 ).

  • Page 52: When Indicator E3 Is Turned On

    ■When Indicator E3 is Turned on Turn knob [2] counterclockwise and align it with the mark position. Open lever [2c] downward ( 1 ) and remove the jammed paper ( 2 ). Note  Jammed paper may be hidden at the upper section. Return lever [2c].

  • Page 53: When Indicator E5 Is Turned On

    ■When Indicator E5 is Turned on Open lever [3a] to the right ( 1 ) and open lever [3b] to the left ( 2 ). Turn knob [3c] clockwise ( 1 ) and remove the jammed paper ( 2 ). Turn knob [2f] counterclockwise ( 1 ) and remove the jammed paper ( 2 ).

  • Page 54: When Indicator E7 Is Turned On

    Open lever [4a] to the right ( 1 ), turn knob [2f] counter- clockwise ( 2 ), and remove the jammed paper ( 3 ). Note  As holding the lever [4a] with a hand, turn knob [2f] and remove the paper. Turn knob [3c] clockwise ( 1 ) and remove the jammed paper ( 2 ).
  • Page 55 Open lever [3a] to the right ( 1 ) and open lever [3d] to the right ( 2 ). Collect cut pieces around the trimmer unit in the waste container using the waste collecting bar. If cut pieces cannot be collected in the waste container, move them by the waste collecting bar and remove them with hands.

  • Page 56: Folder Unit

    Folder Unit Device Components / Caution Labels Bottom Component Function Tri-Fold Output Tray Button Press the button to remove paper from the Tri-Fold Output Tray. The Tri-Fold Output Tray is opened when the lamp stops blinking and comes on and the lock is released. Cover Open this cover to clear paper jams.
  • Page 57 Paper Jams Note  The error indicator at the top of the Finisher is turned on. When the priority device indicator (top lamp) blinks, first of all perform the paper jam operation. If paper is jammed, the machine stops and an alarm sounds. Follow the instructions displayed on the screen to remove the jammed paper.
  • Page 58 ■When Indicator E11 is Turned on Open lever [2g] to the right ( 1 ), turn knob [2c] counter- clockwise ( 2 ), and remove the jammed paper ( 3 ). Return lever [2g]. ■When Indicator E12 is Turned on Pull out the Tri-Fold Output Tray [2d].

  • Page 59: Finisher D

    Finisher D In this guide, “Finisher D6” and “Finisher D6 with Booklet Maker” are generally referred to as “Finisher D”. Device Components / Caution Labels Component Function Hole Punch Waste Container Punched pieces go in here. Refer  For the discard method of waste in the waste container, refer to the label affixed on the machine.
  • Page 60 Component Function Booklet Tray Saddle stitch and Single fold paper is ejected. Note  When the Square Back Fold Trimmer is equipped, it is installed to the Square Back Fold Trimmer. Cover Open this cover to clear paper jams, replace the Staple Cartridge, remove jammed staples or dispose of cut pieces for punched holes.
  • Page 61 Item Specification Paper capacity Top Output Tray 500 sheets Finisher Tray 3,000 (2,000 sheets with Booklet Maker) (No staple) (sheets) JIS B4 or greater 1,500 Mixed Size Stacking Finisher Tray 200 copies or 3,000 sheets (With staples) (2,000 sheets with Booklet Maker) JIS B4 or greater 100 copies or 1,500 sheets Booklet Tray...
  • Page 62 Item Specification Dimensions (mm) Finisher Width 855 x Depth 725 x Height 1,200 Finisher with Booklet Maker Width 892 x Depth 725 x Height 1,200 Note  When Banner Print Kit is installed: • top output tray's angle (B) + Banner Print Extension Kit: Width +281 x Depth ±0 x Height +222 •...
  • Page 63 Outputting Paper Top Output Tray Loading Guide Place it on the Top Output Tray when using an envelope. Changing Angle Change the angle when output paper remains at the exit and paper full is detected immediately. Especially in the following case, paper full is likely to be detected, change the angle to the B posi- tion.
  • Page 64 ■Banner Print Extension Kit Long paper can be loaded without its lead edge sticking out. Paper size (mm) Tray capacity (sheets) Width: 210 to 330 Length: 489 to 660 Important  When paper exceeding the tray capacity is loaded, the Extension Tray may get broken. ■Extension Tray Push the Top Output Tray from the rear side as pinching the cap and remove the 4 caps at the front edge of the...
  • Page 65 Change the angle of the Top Output Tray to the lower fixed position (A). Install the wires on the extension trays. Note  As holding the extension tray with a hand, insert the fixing devices firmly, and check that the wires will not come off from the exten- sion tray.
  • Page 66 Staple Cartridge Replacing Staple Cartridge Consumables recommended by our company are manufactured under the standards suitable for this machine. Using consumables not recommended by our company may affect print quality or performance provided by the product. Use consumables that our company recommends for this machine.
  • Page 67 Staple Cartridge for Side Stitch Confirm that the machine is not operating, and open the Cover. Pull out [R1]. Note  After removing the Staple Cartridge, check to make sure that there is no staple inside of the Finisher. Open the cover of the unit and remove the jammed staples.
  • Page 68 Remove the jammed staples. Insert the Staple Cartridge into the original position. Hold the handle and lightly press it up until you hear a click. Note  Align the “” marks. Push in the Booklet Maker [3]. Close the cover. When Staple Cartridge Comes off If the Staple Cartridge comes off from the unit due to fall during operation, etc., perform the fol- lowing steps.
  • Page 69 Turn it over as the handle is at the moved position and take out the Staple Cartridge from the unit. Remove the staples that stick out from the Staple Cartridge. Caution Please be very careful not to hurt your fingers, etc. when separating staples. Insert the Staple Cartridge into the unit.
  • Page 70 Paper Jams Note  The error indicator at the top of the machine is turned on. When the priority device indicator (top lamp) blinks, first of all perform the paper jam operation. If paper is jammed, the machine stops and an alarm sounds. Follow the instructions displayed on the screen to remove the jammed paper.
  • Page 71 ■When Indicator E2 is Turned on Open lever [1c] to the right ( 1 ), turn knob [1e] clock- wise ( 2 ), and remove the jammed paper ( 3 ). Note  Jammed paper may be hidden at the upper section. Return lever [1c].
  • Page 72 ■When Indicator E6 is Turned on Remove the jammed paper that sticks out from the exit of the Finisher Tray. Open and close the cover. Close the cover. Check the curl direction of the jammed paper and correct the curl. Refer ...
  • Page 73 ■When Indicator E8 is Turned on Pull out Booklet Maker [3]. Note  Confirm that paper is not jammed at the lever [3a] before pulling it out. Turn knob [3b] counterclockwise ( 1 ) and remove the jammed paper ( 2 ). Push in the Booklet Maker [3].

  • Page 74: Square Back Fold Trimmer

    Square Back Fold Trimmer Device Components / Caution Labels Component Function Left Cover Open this cover to clear paper jams. Right Cover Open this cover to clear paper jams. Booklet Tray Outputs are delivered here. Note  When Square Back is performed, a thin press mark parallel to the back is made.
  • Page 75 Main Specifications Item Specification Paper size According to Saddle stitch / Single fold of Finisher D Paper weight Booklet Tray capacity 20 copies (15 sheets or less per copy), 15 copies (16 sheets or more per copy) Note  • Storing may not be possible up to this value depending on your use conditions, such as of paper type. Fore Edge Trim Maximum number of Saddle stitch...
  • Page 76 Waste Container Note  Dispose cut pieces while the machine is on. Confirm that the machine is not operating, and pull out the waste container. Hold the belt of the waste container and pull it out with both hands. Note  Do not apply excessive load on the belt by twirling the container as holding the belt, etc.
  • Page 77 Paper Jams Note  The error indicator at the top of the machine is turned on. If paper is jammed, the machine stops and an alarm sounds. Follow the instructions displayed on the screen to remove the jammed paper. Gently remove the paper being careful not to tear it. If paper is torn while it is being removed from the machine, remove all the torn pieces making sure that none remain inside the machine.
  • Page 78 Turn knob [3b] clockwise and remove the paper. Close the Left Cover. ■When Indicator E2 is Turned on Open the Left Cover. Remove the jammed paper. Close the Left Cover. ■When Indicator E3 is Turned on Open the Right Cover. Remove the jammed paper.

This manual is also suitable for:

Revoria press e1125Revoria press e1110Revoria press e1100

Table of Contents