FujiFilm ApeosPro C810 Reference Manual
Main unit
Hide thumbs
Also See for ApeosPro C810:
- Reference manual (88 pages) ,
- User manual (12 pages) ,
- Reference manual (43 pages)
Related Manuals for FujiFilm ApeosPro C810
Summary of Contents for FujiFilm ApeosPro C810
- Page 1 ApeosPro™ C810 ApeosPro C750 ApeosPro C650 Reference Guide Main Unit February 2022 GM1036E2-4 Edition 1 FUJIFILM Business Innovation Corp.
- Page 2 This product uses eT-Kernel. eT-Kernel is a trademark of eSOL Co., Ltd. in Japan and other countries. Other company names or product names are registered trademarks or trademarks of each company. FUJIFILM and FUJIFILM logo are registered trademarks or trademarks of FUJIFILM Corporation. ApeosPro, ApeosWare, DocuWorks, PaperSecurity, Smart WelcomEyes and TrustMarkingBasic are registered trademarks or trademarks of FUJIFILM Business Innovation Corp.
- Page 3 Notations in Manual The following symbols are used in this manual. Indicates important information you have to know or be reminded before Important operations. Indicates supplemental information useful for operations. Note Indicates reference destinations. Refer “ ” Names and inputs of folders, files, apps, and functions. Also reference pages of the manual.
-
Page 4: Before Using The Machine
Before Using the Machine Device Components Front Component Function Document Cover Holds a document in place. Document Glass Load a document here. Control Panel Consists of operation buttons, LED indicators, and the Touch Panel Display. Smart WelcomEyes(SWE) Motion Exits the Power Saver Mode when the machine detects Sensor user presence. - Page 5 Component Function Waste Toner Container Cover Open this cover to replace the Waste Toner Container. Paper Trays 1, 2, 3, 4 Load paper here. Locking casters Used to move this machine. Lower Left Cover Open this cover to clear paper jams. Paper Tray 5 (Bypass) Used for loading non-standard paper that cannot be loaded in Trays 1, 2, 3, 4.
-
Page 6: Lan Connection
Component Function Wireless Network Kit Used for connecting wireless network (Wi-Fi/Bluetooth) to the (optional) machine. Reset button Automatically switches the machine off when a current leakage is detected. LAN connection When connecting to the network port, keep the machine power switched off. Note When a connection failure occurs, it may be improved by setting [Disabled] in >... - Page 7 Inside Component Function Catch Tray Fan Kit Device necessary to use the Offset Catch Tray or Simple Catch Tray. (optional) Offset Catch Tray Outputs are delivered here. (optional) Lower Right Cover Open this cover to clear paper jams. Waste Toner Open this cover to replace the Waste Toner Container.
-
Page 8: Control Panel
Control Panel Refer For Control Panel, refer to the “Reference Guide - Operations”. Component Function Built-in IC Card Used to authenticate a user using an IC card. Reader (optional) Paper Clip Tray Used for placing paper clips and staples. Power Button The power switches on. -
Page 9: Print Area
Component Function USB memory slot Insert a USB memory device directly here. (optional) Note A memory card reader or a USB memory device cannot be connected to the USB memory slot with a USB cable. Note that the machine will not recognize the memory on a memory card reader or a memory device connected to a USB interface connector on the rear side of the machine when a USB memory device is already inserted in the USB memory slot. - Page 10 Larger than A3 Copying Max: 297 x 432 Printing Max: 323 x 480 Long paper Max: 323 x 1,292 Changing the extended printable area settings Login to the System Administrator Mode. > [Settings] > [App Settings] > [Print Settings] > [Other Settings] >...
-
Page 11: Recommended Paper
Paper Recommended Paper Standard paper Paper name Paper type setting for paper Image quality Paper weight tray guarantee (g/m Uncoated Monochrome paper J paper Uncoated Color To use paper other than the above, contact your local representative. Unusable paper Avoid using the following paper to prevent machine malfunction. Paper using ink that deteriorates with fusing Damp paper, damp and wavy paper ... -
Page 12: Storing And Handling Paper
Storing and Handling Paper Storing paper Follow the guidelines below since paper is susceptible to moisture in the air and easily deformed by impacts. Store paper in a place of low humidity. Paper that has absorbed moisture can create paper jams or poor image quality. -
Page 13: Loading Paper
Basic Operations of the Machine Loading Paper After loading paper, configure the Paper Tray settings on the Home screen. Important Do not place paper or other objects in the reserved space of the tray. It may cause paper jams or machine malfunction. - Page 14 When loading paper whose size is JIS B4 or larger, pinch the knob and lift the paper rear end guide, and set the guide into the hole for the indicated size. Pinch the two Guide Clips, and adjust to the correct paper size.
- Page 15 Paper Trays 3, 4 The paper feeding method is the same for Paper Trays 3 (left side) and 4 (right side). The bottom face of loaded paper is the surface printed on. Loadable paper Paper size JIS B5, A4, Letter Single side 52 to 300 Paper weight (g/m...
- Page 16 Paper Tray 5 (Bypass) The Paper Tray 5 (Bypass) allows you to use a variety of paper sizes and types that cannot be used in Paper Trays 1 to 4. The top face of loaded paper is the surface printed on. Loadable paper Paper size (mm) Standard...
- Page 17 Postcards Paper orientation: SEF Envelopes Paper orientation when the flaps are open: Flaps come at the left when viewed from the front of the machine Paper orientation when the flaps are closed: Flaps come at the right when viewed from the front of the machine Note ...
- Page 18 Adjust the Paper Guide to the correct paper size. 3 Basic Operations of the Machine...
-
Page 19: Loading Documents
Loading Documents Document Feeder Loadable paper Paper size A3, 11 x 17" Custom size 84 x 140 mm to 297 x 432 mm Paper weight Single side printing 38 to 200 (g/m Double side printing 50 to 200 Maximum number of sheets (sheets) (80 paper) Note When the Fax Kit is equipped, the loadable paper size is up to 600 mm for the length. -
Page 20: Document Glass
Open the Document Stopper. Note To prevent a document from being left behind, “Document Feeder Attention Light” is turned on after the Scan job is completed and turned off after approx. 3 sec. Document Feeder Attention Light Document Glass Loadable paper Paper size (mm) Width Up to 297... -
Page 21: Outputting Paper
Outputting Paper Print Surface The print surface refers to the surface printed on in single-sided printing (the first page in double- sided printing). Paper is output to the Tray with the print surface faced downward in the case of front side output, and with the print surface faced upward in the case of back side output. - Page 22 Extension Tray Insert 2 extension trays until they stop. Note Pass them through over the guide at the rear side of the tray until they stop. Thin paper loading wire When it is difficult to load thin paper, install the wire. Note The tray capacity is 10 sheets.
-
Page 23: Airflow Setting
Offset Note This function is available only for the Offset Catch Tray. Offset cannot be performed on the simple catch tray and Long Catch Tray. The paper is output with offset stacking for easy separation. Use the printer driver to set the offset of outputs. Paper size (mm) Width 170 to 297... -
Page 24: Maintenance
Maintenance Consumables Consumables recommended by our company are manufactured under the standards suitable for this machine. Using consumables not recommended by our company may affect print quality or performance provided by the product. Use consumables that our company recommends for this machine. -
Page 25: Touch Panel Display
When replacing the Waste Toner Container, toner may spill and soil the floor. We recommend laying a piece of paper or a sheet on the floor beforehand. A trouble with image quality results if the Drum Cartridge is placed under a direct sunlight or intense ... -
Page 26: Document Feeder Rollers
Scanner Document cover, Document Glass, film, scanner glass For the cleaning method, refer to the label on the main unit. Wipe off any dirt with the supplied cloth about once a month. When stains cannot be removed easily, wipe them lightly with the soft cloth slightly moistened with a thin neutral detergent solution. -
Page 27: Right Side
Note When the lead edge of the jammed paper protrudes toward the Top Output Tray, pull the paper downward to remove it. Inside Lower Left Cover Open the Lower Left Cover. Note When High Capacity Feeder B1 is installed, hold the handle and fully move the unit to the left. - Page 28 Paper Trays 1, 2 Pull out the Paper Tray where the paper jam occurred until it stops. Remove the jammed paper. Push in the Paper Tray. Paper Trays 3, 4 Pull out the Paper Tray where the paper jam occurred until it stops.
-
Page 29: Duplex Automatic Document Feeder
Paper Tray 5 (Bypass) Remove the jammed paper. When a message appears on the control panel to cut the paper, cut the base of paper without pulling the paper out, and then tap [Confirm]. Remove all the paper from the Paper Tray 5 (Bypass), and then load the paper again. -
Page 30: Transfer Unit
Open the Document Cover, pull down the handle to open the Side 2 scanner, and then remove the document. Close the Side 2 scanner, then close the Document Cover. Transfer Unit Note Before pulling out the Transfer Unit, check the screen display for any remaining paper in the left and right covers of the machine, Paper Tray 5 (Bypass), Exit, or optional High Capacity Feeder and Finisher. - Page 31 [2a] Open the handle [2a] and remove the jammed paper. Return the handle [2a]. [2b], [2c] Open the handle [2b] to open the handle [2c] and remove the jammed paper. Return the handle [2b] and handle [2c]. [2d] Open the handle [2d] down and remove the jammed paper.
- Page 32 When paper is jammed between the right cover of the High Capacity Feeder and the machine Note Open the right cover and remove the jammed paper. Do not remove the jammed paper from the machine side. Do not pull out the Transfer Unit of the machine. Otherwise, the jammed paper is torn and unable to be ...
-
Page 33: Main Specifications
Appendix Main Specifications This section lists the main specifications of the machine. Note that the specifications and the appearance of the product may change without prior notice. Note The specifications are not intended to guarantee the image quality performance and feeding performance of all papers. - Page 34 Item Specification Continuous print speed Paper size (pages/minute) C810 C750 C650 Note When continuous single side printing of same document, 52 to 128 g/m (color), 52 to 176 g/m (monochrome), uncoated. The continuous print speed may be lowered according to the data output conditions, auto adjustment of image quality, job with mixed paper sizes and/or paper types, switch of the paper feed tray, and paper output for long paper.
-
Page 35: Copying Function
Item Specification Installation space (mm) Width 1,759 x Depth 1,791 Note Space requirement (of the minimum configuration) when the Catch Tray is installed to the main unit and the Paper Tray 5 (Bypass) is fully extended. Copying Function Item Specification Scan 600 x 600 dpi resolution... - Page 36 Item Specification Transmission time 2 seconds or more but below 3 seconds Note When transmitting an A4 size 700-character document in the standard quality (8 x 3.85 lines/mm) and high speed mode (28.8 kbps or above: JBIG). This is only the transmission speed for image information and does not include the controlling time for the communication.
-
Page 37: Safety Notes
Safety Notes Refer Also refer to “User's Manual”. Operational Safety Do not place objects weighing more than 80 Kg in Consumables Storage Unit. Heavy loads may deform or break them. Do not put your weight on or lift up a door of Consumables Storage Unit. It may cause deforming or breaking it. -
Page 38: Legal Notice
Legal Notice Printing certain documents may be illegal in your country. Penalties of fines or imprisonment may be imposed on those found guilty. The following are examples of items that may be illegal to copy or print in your country. ... -
Page 39: Location Of Warning And Caution Labels
Location of Warning and Caution Labels 5.2 Safety Notes... - Page 40 5 Appendix...
- Page 41 5.2 Safety Notes...
- Page 42 The locations of the labels for Finisher are explained using an illustration in which the Folder Unit is installed to Finisher C as an example. 5 Appendix...
- Page 43 Symbols Marked on the Machine DANGER, DO NOT USE DO NOT COPY CAUTION, AND ENVELOPE MONEY WARNING CAUTION DO NOT USE DO NOT THROW A (HEATED WINDOWED TONER SURFACE) ENVELOPE CARTRIDGE INTO AN OPEN FLAME DO NOT INSERT A DO NOT USE DO NOT THROW FINGER POSTCARDS...
- Page 44 CAUTION (HEAVY PAPER JAM USB TERMINAL OBJECT) MARKING RISK TO SINGLE WORKER CLEANING OF GENERAL LAN TERMINAL SCANNER INSTRUCTIONS MARKING FACE PRINT FACE PRINT SURFACE DOWN SURFACE UP 5 Appendix...
-
Page 45: New Zealand Fax Modem Statements
New Zealand FAX modem statements General “The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom’s network services”...