傳真步驟 ROCEDURE 放置原稿 OADING OCUMENT 1.1.1 Document Feeder 自動送稿裝置 Remove any paper clips and staples before 放置文件前,請取下萬字夾和清走打釘。 loading a document. 1. Adjust the document guides to match the size 1. 調整原稿調整桿至符合紙張尺寸, 抬起擋紙 of the document loaded. Raise the document 器。 stopper.
1.2.1 Using the Numeric Keypad 使用數字鍵 1. 選擇【請輸入收件人。】。 1. Select [Enter Fax Number]. 2. 用數字鍵輸入傳真號碼。 2. You can specify recipients using keyboard input. 3. 如果輸入數值錯誤,按 鍵並輸入正確數值。 3. If you enter an incorrect number, press the button and re-enter the correct value. 4.
1.2.2 Using the Address Book 使用電話簿 1. 選擇 。 1. Select 2. 按【全部】,選擇傳真號碼,然後按 2. Select the recipient numbers from [All 【OK】。 Contacts]. Press [OK]. 注意: Note: 您可以在步驟 2 指定多個通信對象。 You can select multiple numbers at Step 2. 3. 按【送信】開始傳真工作。 3. Press [Send] to start the fax job. Page 5 of 18...
原稿畫質 2.3 O RIGINAL 文字 Text 傳輸僅帶有文字的原稿時選擇。 Transmitting a document that contains only text. 照片/ 文字 Photo & Text Transmitting a document that contains both text 傳輸帶有文字及照片的原稿時選擇。 and photos. 照片 Photo Transmitting a document that contains only 傳輸僅帶有照片的原稿時選擇。 photos. Page 10 of 18...
送信畫質 2.4 R ESOLUTION 標準 Standard (200 x 100 dpi) Transmitting standard documents 傳輸文字清晰的普通原稿時選擇。 Fine (200dpi) 高畫質 Transmitting documents with small text or 傳輸小字及/或細緻影像原稿時選擇。 detailed images. Superfine (400dpi) 超高畫質(400 dpi) 傳輸極小字體及/或極細緻影像原稿時選擇。 Transmitting documents with fine images 超高畫質(600 dpi) Superfine (600dpi) 傳輸極小字體及/或極細緻影像原稿時選擇。...
送信確認報表 CKNOWLEDGEMENT EPORT 不印出 不列印送信確認報表。 No Transmission Report is printed. 印出 A Transmission Report is automatically 傳輸完成時,自動列印送信確認報表。 printed. Page 12 of 18...
免持聽筒 2.7 O HOOK Use this feature when using Manual Send. 使用手動送信時,請使用此功能月已。 輸入收件人 Entering a destination 使用英數字元指定收件人。按【啓動】開始傳真 Use alphanumeric characters to specify a destination. Then, Press the [Start] to start the 工作。 fax job. Line Cut 線路中斷 Cuts the line connected. 切斷連線。...
傳真期間的操作 PERATIONS URING AXING 停止傳真 3.1 S TOPPING THE 1. 按操作面板上的【停止】。 1. Press [Pause] on the touch screen. 2. 按【中止】。 2. Select [Delete]. 3. 若未顯示步驟 1 或 2 中的畫面,按 3. If the screen in step 1 or 2 does not appear, 【工作確認】。...
Page 17
4. 選擇要取消的工作。 4. Select the job to cancel. 5. 選擇【暫停】。 5. Select [Pause]. 6. 選擇【中止】。 6. Select [Delete]. Page 16 of 18...
傳真時預覽讀取的影像 3.2 P REVIEWING THE MAGES DURING A 讀取下一個文件時,您可預覽之前讀取的影像。 You can preview the read images while reading the next document. 1. 在【傳真】畫面勾選【預覽】的狀態下開始掃 1. When a document starts to be read with a 描,將顯示步驟 3 的畫面。 check mark is applied to [Preview], the screen in step 3 is displayed.
放置下一份原稿 OAD THE OCUMENT 如果還有其他原稿,請在掃描原稿時,在顯示幕 If you have another document, select [On] on the touch screen while the current document is being 上選擇【有】。 scanned. 1. 請在掃描進行期間選擇【有】。 1. Select [On] while scanning is in progress. 2. 放入下一份原稿。 2. Load the next document. 2.
Page 20
2513-2513 This document includes Fuji Xerox product(s), licensed from Xerox Corporation. The distributor of the product(s) is FUJIFILM Business Innovation Corp. Xerox, Xerox and Design, as well as Fuji Xerox and Design are registered trademarks or trademarks of Xerox Corporation in Japan and/or other countries.