FujiFilm Drypix 5000 Operation Manual page 119

Troubleshooting
5.5.6 When films other than DI-HL, DI-HLc, and DI-ML were placed:
(A label on the pack is other than red or green (DI-ML).)
(1) Before the film pack is removed:
Confirm the color of the film pack label outside of the film tray.
If it is not red or green (DI-ML), the film cannot be used in this equipment.
[Fig. 5.42]
Film pack
Press the
Pull out the tray and remove the wrong film.
Place a new correct film and then follow the normal procedures.
(2) When the film pack was pulled out:
Films printed after replenishing films (replacing a film pack), color tone and density may be
abnormal and cannot be printed correctly.
In this case, reconfirm the color of the removed film pack label. If it is other than red or
green (DI-ML), films cannot be used in this equipment.
Report it to the nearest service center.
[Fig. 5.43]
Red or Green
006-240-50 2006.10
Arrow mark label
The oblique line portion
has been removed.
button to unlock.
Arrow mark label
The oblique line portion
has been removed.
Red or Green
Barcode
1
2
3
4
5
6
7
5-33