Fence - Grizzly G0636X Owner's Manual

Fence

To install the fence handle:
1. Thread the fence handle onto the fence, as
shown in Figure 18, and tighten the hex nut
against the fence pivot block to secure the
handle.
Pivot
Block
Figure 18. Fence handle installed.
2.
Install the resaw fence lock handle (with the
washer and moving plate) onto the fence,
then slide the resaw fence over the moving
plate as shown in Figure 19.
Note: Leave the moving plate and lock
handle loose enough to slide on the resaw
fence.
G0636X 17" Ultimate Bandsaw
Set
Screw
Hex
Nut
Rail
Resaw Fence
Resaw Lock
Handle
Figure 19. Attaching resaw fence to standard
fence.
3. Tighten the resaw lock handle.
4. Pull the fence handle up and place the fence
assembly on the rail, as shown in Figure 18.
5. Push the fence handle down to lock the fence
assembly in place.
Moving
Plate
-19-