Table of Contents
Advertisement
use coolants or water or use the tool as a fi xed
tool.
p. Grip the tool securely with both hands while
operating.
SPECIAL SAFETY RULES
a. This product is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the product by a person
responsible for their safety. Children should be
supervised to ensure that they do not play with
the product.
b. Keep children and visitors away. Visitors should
wear safety glasses and be kept at a safe distance
from work area. Do not let visitors come in contact
with the tool or the extension cord.
c. Complies with AS/NZS 60745.
d. It is recommended that this tool always be supplied
via a residual current device with a rated residual
current of 30mA or less.
SYMBOL
Safety Alert
V
Volts
Hz
Hertz
Alternating Current
W
Watts
nₒ
No-load speed
n
Rated speed
min¹־
Revolutions or reciprocations per minute
Conformity
Double insulation
Wear ear protection
Wear eye protection
Please read the instructions carefully before
starting the machine.
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice.
Recycle raw materials instead of disposing
of as waste. The machine, accessories and
packaging should be sorted for environmental-
friendly recycling.
SPECIFICATIONS
Grinding wheel diameter
Voltage
Input
Spindle thread
Rated speed
Disc bore size
Net weight
NOTE: Be sure to check the nameplate on the product,
because the voltage is subject to change depending on
the area in which the product is to be used.
STANDARD ACCESSORIES
See Figure 1 and 3.
Auxiliary handle
Woolen type bonnet
Grinding wheel
Sanding pad
Wrench
Sanding nut
APPLICATIONS
Use only for the purposes listed below:
Grinding: steel and other metals
Polishing: painted surfaces
Sanding: timber
OPERATION
The tool should never be connected to the power supply
when assembling parts, making adjustments, cleaning,
performing maintenance, or when the tool is not in use.
Disconnecting the tool will prevent accidental starting
that could cause serious injury.
MAIN HANDLE
The main handle can be set to right and left at any of the
three positions (0 and 90 degrees) by pressing the rotary
lock button.
4
180 mm (7 in)
240 V
50 Hz
1500 W
M14
1500 - 6500 min¹־
22.2 mm
3.6 kg
WARNING
Advertisement
Table of Contents
