operating power tools may result in serious GENERAL POWER TOOL SAFETY WARNINGS personal injury. b. Use personal protective equipment. Always WARNING wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or Read all safety warnings and all instructions. Failure hearing protection used for appropriate conditions to follow the warnings and instructions may result in will reduce personal injuries.
g. Use the power tool, accessories and tool bits h. Wear personal protective equipment. etc., in accordance with these instructions and Depending application, face in the manner intended for the particular type shield, safety goggles or safety glasses. of power tool, taking into account the working As appropriate, wear dust mask, hearing conditions and the work to be performed.
on direction of the wheel’s movement at the point of SAFETY WARNINGS SPECIFIC FOR SANDING pinching. Abrasive wheels may also break under these OPERATIONS conditions. a. Do excessively oversized Kickback is the result of power tool misuse and/or incorrect sanding disc paper. Follow manufacturers operating procedures or conditions and can be avoided by recommendations, when selecting sanding taking proper precautions as given below.
use coolants or water or use the tool as a fi xed Recycle raw materials instead of disposing tool. of as waste. The machine, accessories and p. Grip the tool securely with both hands while packaging should be sorted for environmental- operating.
Page 9
AUXILIARY HANDLE WARNING The auxiliary side handle houses the wheel lock nut Failure to unplug your grinder sander could result in wrench. To remove the wheel lock nut wrench from accidental starting causing possible serious personal the auxiliary handle, pull it out by the two lugs on the injury.
MAINTENANCE After use, check the tool to make sure that it is in good condition. It is recommended that you take the tool to a Ryobi authorised service center for thorough cleaning and lubrication at least once a year. WARNING Do not make any adjustments while the motor is in motion.