refrigerators. There is an increased risk of electric GENERAL SAFETY RULES shock if your body is earthed or grounded. Do not expose power tools to rain or wet ■ WARNING! Read all instructions,Failure to follow all conditions. Water entering a power tool will increase instructions listed below may result in electric shock, fire the risk of electric shock.
WARNING GENERAL SAFETY RULES A suitable breathing respirator must be worn while sanding lead paint, some woods and metal Disconnect the plug from the power source ■ to avoid breathing the harmful/toxic dust or air. before making any adjustments, changing accessories, or storing power tools.
Page 6
Install sandpaper on your sander. ■ OPERATION Align sander cushion over the paper punch. ■ Push down on sander ■ WARNING Your sander should never be connected to power SANDPAPER SELECTION supply when you are assembling parts, making adjustments, assembling or replacing sandpaper, Selecting the correct size grit and type sandpaper is an cleaning, or when not in use.
It is recommended that you take TO ATTACH THE DUST BAG ASSEMBLY (Fig. 3) this tool to a RYOBI Authorized Service Centre for Follow these directions to attach the dust bag a thorough cleaning and Iubrication at least once assembly.