operating power tools may result in serious GENERAL POWER TOOL SAFETY WARNINGS personal injury. b. Use personal protective equipment. Always WARNING wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or Read all safety warnings and all instructions. Failure hearing protection used for appropriate conditions to follow the warnings and instructions may result in will reduce personal injuries.
g. Use the power tool, accessories and tool bits minute. Damaged accessories will normally break apart during this test time. etc., in accordance with these instructions and h. Wear in the manner intended for the particular type personal protective equipment. of power tool, taking into account the working Depending application,...
causing the wheel to climb out or kick out. The wheel may is not suitable for the higher speed of a smaller tool either jump toward or away from the operator, depending and may burst. on direction of the wheel’s movement at the point of pinching.
MAIN HANDLE Please read the instructions carefully before See fi gure 4. starting the machine. The main handle can be set to right and left at any of the three positions (0 and 90 degrees) by pressing the rotary Waste electrical products should not be lock button.
It is recommended that you take this tool to a Ryobi authorised service center for a thorough cleaning and MOUNTING THE SANDING PAD lubrication at least once a year. See fi gure 8. 1. Unplug the tool. WARNING 2.