Motion Detection - LevelOne FCS-1081A User Manual

Motion Detection

When you click Motion Detection on the Advance mode menu, the Motion
Detection setting menu appears. There are three Motion Detection functions
as sensors to set for different detecting zones. Each one has Threshold and
Sensitivity inputs which you can adjust to specific zone sequentially. Motion
Detection function can support to FTP, SMTP and Alarm output for capturing
and sending images or starting alarm output.
Click it On when you use the Motion Detection function and detecting zone
appears for adjusting and moving. The common setting options are displayed
below. If you do not wish to use the Motion Detection function, click it Off and
press OK.
Motion Detection 1：Click it on for using Motion Detection 1 function as a
sensor. You can adjust and move the detecting zone by using mouse.
Motion Detection 2：Click it on for using Motion Detection 2 function as a
sensor. You can adjust and move the detecting zone by using mouse.
Motion Detection 3：Click it on for using Motion Detection 3 function as a
sensor. You can adjust and move the detecting zone by using mouse.
Threshold ： You can use the tool bar to set up-limit value. When detecting zone
signals are over setting value, it would carry on assigned work.
Sensitivity：You can use the tool bar to set down-limit value. When detecting
zone signals are over setting value, it would carry on assigned work.
44