Table of Contents
Advertisement
Serial Number, Firmware Version and hardware version.
User
The Network Camera default account and password setting is "root/MAC address (in
capital letters)". IP CamLocator provides to assign a password if the Network Camera is
intended to be accessed by others. Use this menu to set the user names and passwords of
Administrator and up to 9 different users (User 1 to User 9), and the access right of each user.
Username：Set a user name between 5 and 16 characters.
Password：Set a password between 5 and 16 characters.
Confirm：Re-type the password to confirm.
Mode：Set s user to Admin, Operator or Viewer mode.
Advertisement
Table of Contents
