Table of Contents
Advertisement
Alarm sending：Select On to set to send mail with connection to the alarm detection.
File attachment：Set whether an image file is attached to the mail sent or not. When On is
selected, the image file made by the settings below is attached. When Off is selected, only the
message is sent.
Image file name：Type the file name you want to assign to the image to attach a mail. You
can use up to 10 alphanumeric, - (hyphen) and _ (underscore) for naming.
Sensor input 1：Click it on for using external sensor which is connected to sensor input1 of
the camera I/O port.
Sensor input 2：Click it on for using external sensor which is connected to sensor input2 of
the camera I/O port.
Sensor input 3：Click it on for using external sensor which is connected to sensor input3 of
the camera I/O port.
Sensor input 4：Click it on for using external sensor which is connected to sensor input4 of
the camera I/O port.
Motion Detection：Click it on for using Motion Detection function as a sensor. You can set
the motion detection function page.
：
Note
• Motion Detection works only when the Video mode is set to MPEG-4 and the Cropping is
set to Off.
Advertisement
Table of Contents
