Table of Contents
Advertisement
IP CamSecure
Step 5:
Click the camera name to increase or decrease cameras you want to playback.
Step 6:
Click OK when completing the setting.
2.3 Search Mode
Click on the Search Mode icon to obtain the Intelligent Search Tool panel. You can setup unusual events
here to in order to detect abnormality during the recorded period.
Intelligent Search Tool Panel:
unusual events here to detect abnormality that occurred during the recorded period.
5 events:
General Motion, Foreign Object, Missing Object, Lose Focus, and Camera Occlusion.
2.3.1 Unusual Event-General Motion
General Motion:
Define Detection Zone:
define more than one zone on the screen by repeating the process.
Sensitivity:
Modify the sensitivity setting by changing the slider control. Move
toward right will increase the sensitivity level, meaning the slightest movement will
trigger the alarm; in contrast, move the slider control toward left will reduce the
sensitivity for movement detection.
Note:
Set up an appropriate sensitivity level reduces the possibility of a false alarm.
For instance, you can lower the sensitivity to avoid the alarm being triggered
by a swinging tree in the breeze.
Interval:
Move the slider control to the right to increase time interval so that the alarm will only be
triggered when the movement lasts longer. Move to the left to reduce the time interval.
Stop When Found:
option to have video kept rolling, and all detected events will show on the list in search result box. Click
on the listed event in the box to jump to the point in the video where a motion is detected.
2.3.2 Unusual Event-Foreign Object
Foreign Object:
area on the screen.
Define detection zone:
detection area. In order to do so, left click and drag on the screen. Alarm will be
triggered when any additional object appears in the detection zone.
Define object size:
object.
Sensitivity:
Modify the sensitivity setting by changing the slider control. Move
toward right will increase the sensitivity level, which means a slight movement will
trigger the alarm; in contrast, move the slider control toward left will reduce the
sensitivity for movement detection.
Interval:
Click and move the slider control to the right to increase time interval so that the alarm will only
be triggered when the object has been removed from the area for longer. Move to the left to reduce
the time interval.
Note:
Setting up an appropriate Interval value will reduce the chance of false alarms. For example, you
can lower the Interval to avoid the alarm being triggered by a pedestrian.
Click on the Search Mode icon to open the Intelligent Search Tool. Set up
Detect all movements in the defined area.
Left click and drag to draw a detection zone. You may
Check the option to have the video stop where motion was detected. Uncheck the
Alarm is set off when any additional object appears in the defined
Before detecting foreign object, it is required to define a
Drag and draw on the screen to define the size of a foreign
-
38 -
LevelOne
Advertisement
Table of Contents
