Table of Contents
Advertisement
with IP CamLocator. The default password is the MAC address (in capital letters).
Connect：After clicking to specific Network cameras in search area and type it with username
and password to connect to the network camera in IP CamLocator. You can use the tool bar
to optimize video Brightness, Contrast, Saturation and Hue.
User
The User page provides you all Network cameras configurations in the network with
product or downloaded configuration file information, including Info, User, Date Time, TCP/IP,
PPPoE and DDNS.
Load configuration File：Select From PC File or From Device, the former one can load
information of downloaded configuration file and the latter one can load Network Camera
configurations in the network.
From PC File：Click it and press Load to select configuration location from PC.
Note:
• Configuration file format is *.conf.
Advertisement
Table of Contents
