To adjust the camera setting
Consult with the dealer of the peripherals for correct installation.
BLC / OFF
AES / AI
DD / VD
LEVEL
To adjust the lens
There is a fixed lens free bundled. Whereby revolving the lens, it can be focused on. However, users shall
loosen or tighten the gray loop by using the wrench attached in the package.
1.Unscrew it first
2. Loosen or tighten
the gray loop.
The Network Camera provides the auto iris lens connector. If the
auto iris lens is used, the dip should be adjusted to AI option. And
you also have to select VIDEO drive or DC drive lens by select
correct iris mode. The pin assignment of the auto iris lens connector
is as follows.
Video Drive
1. 12V, Power Source
2. Not used
3. IRIS
4. Ground
Back Light Control
Auto Electronic Shutter or Auto-Iris lens
DC drive or VIDEO drive auto-iris lens
Brighten or darken the video image
DC Drive
1. DAMP -
2. DAMP +
3. DRIVE +
4. DRIVE -