Timer Operation - Trane CWCS Operation Manual

TIMER OPERATION

Before using the timer function, be sure that the
remote controller is set to the correct current
time.
20
ON TIMER
(Begins air conditioner operation at the set time)
1
When the " ON TIMER " buttton is pressed, "ON TIMER" will be
displayed and flashed, it means entering the "ON TIMER" setting.
Meanwhile, can use "
2
When the adjustment is finished, press "ENT."button once. Then
"ON TIMER" signal keep lighted and setting is confirmed.
3
If you don't press any button over 30 seconds, the setting procedure
will be stopped and return to current time .
OFF TIMER
(Stops the air conditioner operation at the set time)
1
When the " OFF TIMER " buttton is pressed, "OFF TIMER" will be
displayed and flashed, it means entering the "OFF TIMER" setting.
Meanwhile, can use "
2
When the adjustment is finished, press "ENT."button once.
Then "OFF TIMER" signal keep lighted and setting is confirmed.
3
If you don't press any button over 30 seconds, the setting procedure
will be stopped and return to current time.
To Cancel the Timer
1
Press " ON TIMER " or "OFF TIMER" . The display of " ON TIMER "
or "OFF TIMER" will be flashed.
2
Press " DEL. " button . The signal " ON TIMER " and "OFF TIMER"
will disappear, and display the current time. That means the cancel
step is finished.
To Stop Air Conditioner Operation while the Timer is Operating
Press the POWER ON/OFF button.
To Change Operating Conditions
If you wish to change operating conditions (Mode, Fan Speed, Thermostat
Setting, Air flow direction), after making the timer setting wait until the
entire display reappears, then press the appropriate buttons to change the
operating condition desired.
Changing Daily Timer Operation and
Setting Timer Button Function
1. When ON TINER is set, this function will begin to operate at the
presetting time every day.
2. Set ON TIMER them off.
3. Set OFF TIMER then on.
4. When power failure, ON TIMER function will be no effective, it needs to
reset when request.
"buttons to adjust the desired time.
"buttons to adjust the desired time.