Prepartion - Trane CWCS Operation Manual

PREPARATION
Turn on the Power
1
Connect the power plug to an electrical point.
10
Prepare the Remote Control Unit
Load batteries in the remote control unit and set the clock
to the current time.
Load Batteries (R03 / LR03¡ 2)
1
Press and slide the battery compartment lid
on the bottom to open it.
Slide in the direction
of the arrow while
pressing the ¥W place.
2
Insert batteries.
Be sure to align the battery
polarities¡] ¡ /
¡^correctly.
¡‡
3
Close the battery compartment lid.
CAUTION!
Take precautions to prevent infants from acciden-
¡·
tally swallowing batteries.
When not using the remote control unit for an ex-
¡·
tended period, remove the batteries to avoid pos-
sible leakage and damage to the unit.
If leaking battery fluid comes in contact with your
¡
skin, eyes, or mouth, immediately wash with copi-
ous amounts of water, and consult your physician.
Dead batteries should be removed quickly and
¡·
disposed of properly, either by placing in a public
battery collection receptacle, or by returning to a
properly equipped dealer.
Do not attempt to recharge dry batteries.
¡·
NOTE:
Never mix new and used batteries, or batteries of
¡·
different types.
Batteries should last about one year under normal
¡·
use. If the remote control unit's operating range
becomes appreciably reduced, replace the batter-
ies and press the ACL button with the tip of a ball-
point pen or other small object.