JVC KD-AVX1 Instructions Manual page 29

Item
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ON SCREEN LANGUAGE
(OSD LANGUAGE)
MONITOR TYPE
16:9 4:3 LETTER BOX
4:3 PAN SCAN
OSD POSITION
Position 1 Position 2
MP3/JPEG
• For the LANGUAGE settings, see also the language codes list on page 56.
Contents
Select the initial disc menu language.
Select the initial audio language.
Select the initial subtitle language or erase the subtitle (OFF).
Select the language for the Setup menu called up from the remote
controller (see page 28) and some indications shown on the monitor.
• The language for the menus called up from the unit does not
change.
Select the monitor type to watch a wide screen picture on your
monitor.
• 16:9 : Select this when the aspect ratio of your monitor is 16:9.
• 4:3LB [LETTER BOX] : Select this when the aspect ratio of your
monitor is 4:3. While viewing a wide screen picture, the black bars
appear on the top and the bottom of the screen.
• 4:3PS [PAN SCAN] : Select this when the aspect ratio of your
monitor is 4:3.
While viewing a wide screen picture, the black bars do not appear;
however, the left and right edges of the pictures will not be shown
on the screen.
Select the position of the on-screen bar for CD and MP3/WMA (see
page 22) on the external monitor and AV set up menu from the remote
controller (see page 28).
• 1 : Higher position
• 2 : Lower position
The position of other indications than the on-screen bar does not
change.
Select playback file type when a disc contains both MP3 and JPEG
files.
• MP3 : Plays back MP3/WMA files.
• JPEG : Plays back JPEG files.
Eject the disc and insert it again to make the new setting effective.
To be continued....
29