Checking The Engine's Oil Level; Checking The Engine's Cooling Air Intake - Husqvarna Rider 20 ProFlex Operator's Manual

MAINTENANCE
Left-hand fender
Disengage the wire from the differential lock pedal.
Dismantle the screws (1 and 2), and lift off the
fender.
Check the engine's oil level
Check the oil level in the engine when the machine
is horizontal.
Open the engine hood.
Take out the dip stick, wipe off the oil, and insert
again.
The dip stick must be fully screwed down.
Now take out the dip stick again and check the oil
level.
The oil level should lie between the markings on dip
stick. If the level approaches the ADD mark, top up
with oil to the FULL mark on the dip stick.
ADD
The oil is filled in the same hole as the dip stick is in.
FULL
Use engine oil SAE 30 or SAE 10W-30, class CD–CF
(over 0°). Use engine oil SAE 5W-30, class CD–CF
(below 0°).
The total oil volume in the engine is 1.4 litres.
ADD FULL
Check the engine's cooling air intake
Open the engine hood.
Check that the cooling intake is free from leaves,
grass and dirt.
If the cooling intake is blocked this will interfere with
the cooling of the engine, which can damage the
engine.
21
English –