Presentation; Location Of The Controls - Husqvarna Rider 20 ProFlex Operator's Manual

Presentation

These instructions describe the Rider 20 ProFlex.
The Rider 20 ProFlex is equipped with a 20
horsepower Vanguard V-Twin engine from Briggs &
Stratton.

Location of the controls

1. Ignition lock
2. Choke lever
3. Throttle control
4. Counter
5. Lever for adjustment of cutting height
6. Lifting lever for cutting unit with lock button
7. Speed limiter for reversing
8. Speed limiter for driving forward
PRESENTATION
The power transmission from the engine is handled
by a hydrostatic gearbox, which enables variable
speed by using the pedals. One pedal for driving
forward and one for reverse.
9. Brake pedal
10. Lock button for parking brake
11. Differential lock
12. Lever for adjustment of seat
13. Fuel tank cap
14. Main lock
15. Lever to disengage the drive
9
English –