Troubleshooting - Samsung SCO-3080R Series User Manual

Troubleshooting

TROUBLESHOOTING
If you have trouble operating your camera, refer to the following table. If the guidelines do
not enable you to solve the problem, contact an authorized technician.
PROBLEM
Nothing appears on the screen.
The image on the screen is dim.
The image on the screen is dark.
The camera is not working
properly, and the surface of the
camera is hot.
The SENS-UP function does not
work.
The INTELLIGENCE function does
not work.
Color is not correct.
The screen fl ickers continually.
When coaxial communication is
not available
IR-LED isn't lighted.
The camera is not waterproof.
36_ Troubleshooting
Check that the power cord and line connection between the
camera and monitor are fi xed properly.
Check that you have properly connected VIDEO cable to the
camera VIDEO output jack.
Is the lens stained with dirt? Clean your lens with a soft, clean cloth.
Check the monitor and DVR settings.
If the camera is exposed to very strong light, change the camera position.
Adjust the contrast feature of the monitor or DVR.
If you have an intermediate device, set the 75 / Hi-z properly.
Check that you have properly connected the camera to an
appropriate power source.
Check that AGC of EXPOSURE SETUP menu is 'OFF'.
Check that SHUTTER of EXPOSURE SETUP menu is 'A.FLK' or
'MANUAL'.
▶
Check that INTELLIGENCE of menu is 'OFF'.
Check the setting of WHITE BAL SETUP menu .
Check that the camera is not pointing at the sun.
Make sure that the camera and monitor are installed within
the recommended distance.
Use the video amplifi er equivalent to coaxitron if the
recommended installation distance is exceeded.
Isn't DAYNIGHT function setting up the color mode?
Please change the AUTO or B/W mode.
Please check the Front Cover and Main Body by the following
Guide Label.
SOLUTION