-
INT : Internal Synchronization Type
-
LL : Power Synchronization Type, Line-lock
Press the Function Setup switch.
You can select a desired phase from 0 to 359 when select 'phase'.
When using AC power at 60Hz(NTSC), 50Hz(PAL) frequency, you can use the LL type
synchronization.
When the power is DC 12V, the SYNC menu is fixed to the 'INT' mode.
If the VPS is set to ON, synchronization is fixed to INT.
INTellIGeNCe: Commands the camera to motion-detect and trace an object.
-
MOTION : Select motion types to
detect.
OFF : Not being used.
DETECTION : Since the camera
TRACKING : Commands the camera to
▶FENCE :
You can select up to 4 FENCE.
▶MODE : Determines whether to use
the fence selected in the
FENCE.
▶TYPE : Two types, line and area, of
fences are available.
▶COUNT : Displays the number of times that an object enters or leaves a
fenced area.
▶FILL : Fill or remove color from the FENCE.
▶POSITION : Defines the position and detection direction of a line or
1) LINE FENCE
- SEL POS : Selects a position from POS1,POS2.
- X POS / Y POS : Adjust the size and position of the selected line fence.
- DIRECTION
DIR1 : Detects objects moving left to right on the fence line.
·
detects motion without
any additional external
sensor, you can monitor
activity more efficient.
detect and trace a moving
object.
fenced area.
INTELLIGENCE
▶ 1.MOTION
2.DETECT BOX
3.ALARM OUT
4.DETECT AREA
5.MASK AREA
6.SENSITIVITY
IIIIIIII IIIIIIIIIIIII
7.DET.SIZE
IIIIIIII IIIIIIIIIIIII
8.RETURN
TRACKING
▶ 1.FENCE
2.MODE
3.TYPE
4.COUNT
5.FILL
6.POSITION
7.RETURN
OFF
ON
OFF
3
3
FENCE1
OFF
LINE
OFF
OFF
English_31