Samsung SCO-3080R Series User Manual page 33

-
MASK AREA : Specify a detection
area to mask. Select a mask
area
size and position.
▶AREA : You can select up to 4 areas.
▶MODE : Determines whether to use the
area selected in the AREA.
TOP / BOTTOM / LEFT / RIGHT :
▶
Adjust the size and position of the
selected area.
RETURN : Select this to save the MASK AREA menu settings and return to
▶
the INTELLIGENCE menu.
-
SENSITIVITY : Set the sensitivity of the motion detection. When adjusting
the sensitivity, note that the lower the level means the higher
sensitivity.
-
DET. SIZE : Selects an object size to detect on the screen. When adjusting
the detection size, note that the higher the level means the bigger
detection size.
-
RETURN : Select this to save the INTELLIGENCE menu settings and return to
the SPECIAL menu.
pRIVACy : Mask an area you want to hide on the screen.

1 When the SPECIAL menu screen is
displayed, press the Function Setup
switch so that the arrow indicates
'PRIVACY'.
2 Set up the mode using the Function
Setup switch.
AREA: You can select up to 12 PRI-
-
VACY areas.
- MODE : Determines whether to use
the area selected in the AREA
SEL.
- MASK COLOR : Determine area color. You can select GREEN, RED, BLUE,
- TRANSPARENCY :
- SEL POS/XPOS/YPOS : Adjust the size and position of the selected area.
RETURN : Select this to save the PRIVACY menu settings and return to the
-
SPECIAL menu.
exception
number and specify the
BLACK, WHITE and GRAY.
Adds or removes transparency from the masking
MASK AREA
▶1. AREA
2. MODE
3. TOP
IIIII  IIIIIIIIIIIIIIIIIIII
4. BOTTOM
IIIIIII  IIIIIIIIIIIIIIIII
5. LEFT
 IIIIIIIIIIIIIIIIIIIIIIIII
6. RIGHT
IIIIIII  IIIIIIIIIIIIIIIII
7. RETURN
PRIVACY AREA SETUP
▶ 1.AREA
2.MODE
3.MASK COLOR
4.TRANSPARENCY
5.SEL POS
6.XPOS
 IIIIIIIIIIIIIIIIIIIII
7.YPOS
 IIIIIIIIIIIIIIIIIIIII
8.RETURN
AREA1
OFF
30
110
25
110
AREA1
OFF
GREEN
OFF
L_TOP
10
10
area.
English_33