Table of Contents
Advertisement
Setup
EXPOSURE
1.
When the SETUP menu screen is displayed,
select EXPOSURE by using the Function
Setup switch so that the arrow indicates
'EXPOSURE'.
2.
Select a desired mode using the Function
Setup switch.
BRIGHTNESS : Adjusts the video brightness.
SHUTTER : You can select either auto or
-
ESC : Select this to control the shutter
-
MANUAL : You can control shutter speed manually.
-
A.FLK : Select this when you experience picture fl icker, which can happen
-
--- : Shutter speed is fi xed at 1/60sec(1/50sec).
When the SHUTTER is set to ESC after selecting the Internal Synchronization Type, the picture may
become unstable if the camera faces a bright fluorescent light. Therefore, take care when choosing
the installation position.
When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
Set the shutter mode to --- if color rolling occurs.
AGC (AUTO GAIN CONTROL) :
The higher the gain level, the brighter the screen but the higher the noise.
-
OFF : Deactivates the AGC function.
-
LOW : Allows automatic gain control from 5.3dB to 32dB.
-
HIGH : Allows automatic gain control from 5.3dB to 37dB.
SENS-UP : When it is night or dark, the
-
OFF : Deactivates the SENS-UP function.
-
AUTO : Activates the SENS-UP function.
20_ Setup
manual shutter.
speed automatically. If ESC
is selected, the shutter speed
is automatically controlled
depending on the ambient illumination of the subject.
(NTSC MODEL : 1/60~1/120,000, PAL MODEL : 1/50~1/120,000)
when there is a clash with the frequency of the installed lighting.
camera automatically detects the
light level and maintains a clear
picture if this mode is activated.
MAIN SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
EXPOSURE SETUP
1.BRIGHTNESS
2.SHUTTER
3.AGC
4.SENS-UP
5.RETURN
LIMIT
AUTO
Press SET to Return
DC
ATW
25
---
HIGH
OFF
x2
Advertisement
Table of Contents
