Samsung SCO-3080R Series User Manual page 25


You cannot set the SSNR3 to 'ON' or 'OFF' when the AGC mode of the EXPOSURE menu is 'OFF'.

When adjusting the noise reduction level of the SSNR3 mode, remember that the higher the level
set, the more the noise level will be reduced but that after image may also o ccur.
DAY/NIGHT
You can display pictures in color or black and white.
1. When the SETUP menu screen is displayed,
select 'DAY/NIGHT' by using the Up and
Down buttons so that the arrow indicates
'DAY/NIGHT'.
2. Select a desired mode using the Left and
Right buttons according to the picture
display you want.
AUTO : The mode is switched to 'Color' in a normal environment, but switches to

'B/W' mode when ambient illumination is low. To set up the switching time
for AUTO mode, press the Function Setup switch. You can turn on or off
the burst signal on B/W mode.
- BURST MODE : You can turn on or off the burst signal on B/W mode.
DURATION : You can select the brightness level at which the camera
-
- DWELL TIME : You can select the duration time about changing the
AUTO SETUP
▶1.BURST MODE
2.COLORB/W
DURATION
DWELL TIME
3.B/WCOLOR
DURATION
DWELL TIME
4.RETURN
switches from day to night mode.
day/night mode.
→3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
MAIN SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.SSNR3
▶ 6.DAY/NIGHT
ON
FAST
5 SEC
FAST
10 SEC
DC
ATW
OFF
ON
AUTO
English_25