Setup
White Balance may not work properly under the following conditions.In this case select the AWC
mode.
1 When the color temperature of the environment surrounding the subject is out of
the control range (e.g. clear sky or sunset).
2 When the ambient illumination of the subject is dim.
➌ If the camera is directed towards a fluorescent light or is installed in a
place where illumination changes dramatically, the White Balance
operation may become unstable.
BACKLIGHT
Unlike conventional cameras, the SCO-3080R is designed to deliver a distinctive
subject and background at the same time, even when the subject is backlight, by using
the features of the proprietary SV-V DSP chip.
1.
When the SETUP menu screen is displayed,
select 'BACKLIGHT' by using the Function
Setup switch so that the arrow indicates
BACKLIGHT .
2.
Select a desired mode using the Function Setup
switch depending on the camera purpose.
UseR blC : Enables a user to directly
-
LEVEL : Adjust level of the BLC function.
-
TOP/BOTTOM/LEFT/RIGHT :
Adjust the area to be enhanced.
HlC (High light Compensation) :
This function masks the strong light to
minimize white out due to over exposure and
preserve much of the on-screen details when
the camera aims a strong light source.
-
LEVEL : Adjusts the brightness level of a
-
LIMIT : Enable to change the operating
22_ Setup
select a desired area from a
picture, and to view the area
more clearly.
monitoring area.
condition.
MAIN SETUP
1. LENS
2. EXPOSURE
3. WHITE BAL
4.
BACKLIGHT
5.
SSNR3
BLC SETUP
▶ 1.LEVEL
2.TOP
IIIII IIIIIIIIIIIIIIII
3.BOTTOM
IIIIIIIIIIIIIIIIII III
4.LEFT
IIIIII IIIIIIIIIIIIIII
5. RIGHT
IIIIIIIIIIII IIII
6. RETURN
HLC SETUP
▶ 1. LEVEL
2. LIMIT
3. MASK COLOR
4. MASK TONE
III IIIIIIIIIIIIIIIIII
5.TOP
IIIIIIIIIIIIIIIIIIIII
6.BOTTOM
IIIIIIIIIIIIIIIIIIIII
7.LEFT
IIIIIIIIIIIIIIIIIIIII
8.RIGHT
IIIIIIIIIIIIIIIIIIIII
9. RETURN
DC
ATW
OFF
ON
MIDDLE
30
100
75
IIIII
140
MIDDLE
NIGHT ONLY
BLACK
5
10
120
10
210