introduction
COMPONENT NAMES AND FUNCTIONS
Front
➊
Camera Sunshield
➋
Sunshield adaptor : Fixing the sunshield onto the camera.
➌
Lens
➍
Video Output Terminal to Monitor : Used for monitoring of video output When
➎
Function Setup Switch : Display the menu on the screen and move the cursor
to four directions to confirm status or after changing a
selected item.
➏
Front cover
10_ introduction
camera installation.
Back
➊
Power input terminal : Connect the power as specified for each model here.
➋
MD Output Terminal : Motion detection signals are output through this terminal.
➌
RS-485 control terminal : You can control SETUP MENU through this port by using
external controllers like a Remote controller that RS-485
Communication is supported. For details, see page 15.
➍
Video output terminal : Video signals are output through this port. Connect this port
to the Video IN port of a monitor.
M
Connector
MD
There is no motion
MD(Motion Detection) Output format is open collector.
Signal Level
I/O
USER Vcc
5±0.5sec
0V
There is motion
Output
← →
English_11