Samsung SCO-2370 User Manual page 14

setup
ZOOM TRACK : Select 'ON' for the
'SMART ZOOM' item in the MOTION
DETECTION menu and press Function
Setup switch to change the settings for the
'SMART ZOOM' function.
Use the Function Setup switch in the
'ZOOM' item to select 'AUTOTRACK' or
'TRACK' and press Function Setup switch
to activate the zoom action focus function.
- AUTO TRACK : Zooming in while
deciding or adjusting the status of the focus.
- TRACK : The camera moves the focus track which is established.
- OFF : Only the zoom lens moves.
ZOOM SPEED : Confi gure zoom tracing
speed using this feature. Position the
indicator over 'ZOOM SPEED' using the
Function Setup switch and then set to
desired mode using the Function Setup
switch.
- FAST : To move zoom fast.
- SLOW : To move zoom slowly.
- MEDIUM : To move zoom at medium speed.
D-ZOOM : Confi gure magnifi cation limit
from x2~x16 using this feature. Position
the indicator over 'D-ZOOM' using the
Function Setup switch Set 'D-ZOOM' to
'ON' and press the Function Setup switch
to confi rm.
- Set 'ZOOM LIMIT' to the desired level
using the Function Setup switch.
M 
When the DIS is enabled, you cannot use the
D-ZOOM.
26_ setup
FOCUS SETUP
MODE AUTO
ZOOM TRACK AUTO TRACK
ZOOM SPEED FAST
D-ZOOM
OFF
ZOOM POS INIT OFF
USER PRESET OFF
LENS INIT MANUAL
RETURN
FOCUS SETUP
MODE AUTO
ZOOM TRACK AUTO TRACK
ZOOM SPEED FAST
D-ZOOM
OFF
ZOOM POS INIT OFF
USER PRESET OFF
LENS INIT MANUAL
RETURN
FOCUS SETUP
MODE AUTO
ZOOM TRACK AUTO TRACK
ZOOM SPEED FAST
D-ZOOM OFF
ZOOM POS INIT OFF
USER PRESET OFF
LENS INIT MANUAL
RETURN
D-ZOOM LIMIT SETUP
LIMIT X2
RETURN
ZOOM POS INIT : Moves to the controlled
ZOOM position when the power is truned on
and the initial ZOOM position has been set.
- AUTO : If you turn the power off and on,
the zoom magnifi cation level is
set to the previous level that was
set before the power went off.
- MANUAL : The zoom magnifi cation level
can be set from 1x to 37X.
M 
The zoom postion is saved after 5 seconds when you set zoom function.
USER PRESET : Preset user-designated
confi gurations using this feature. Position
the indicator over 'USER PRESET' using
the Function Setup switch and then set
to 'ON' using the Function Setup switch.
Press the Function Setup switch to confi rm.
- PRESET NO : Up to 128 preset
confi guratons are supported.
- PRESET SAVE : Save confi gured preset.
- PRESET CLEAR : Clear confi gured preset.
- RETURN : Revert to the FOCUS SETUP menu.
ZOOM POS SETUP
: TELE : WIDE
X1
LENS INIT : Use the Function Setup
switch in the 'Lens initialization' item select
'AUTO' or 'MANUAL' and then press the
Function Setup switch.
- AUTO : Initialize the lens by setting the
date. Initializing time can be set to 1 ~ 7
days, and the lens is initialized at the specifi ed time interval since the setting.
- MANUAL : The Lens will reset when you press the Function Setup switch.
FOCUS SETUP
MODE AUTO
ZOOM TRACK AUTO TRACK
ZOOM SPEED FAST
D-ZOOM OFF
ZOOM POS INIT OFF
USER PRESET OFF
LENS INIT MANUAL
RETURN
FOCUS SETUP
MODE AUTO
ZOOM TRACK AUTO TRACK
ZOOM SPEED FAST
D-ZOOM OFF
ZOOM POS INIT OFF
USER PRESET OFF
LENS INIT MANUAL
RETURN
USER PRESET SETUP
PRESET NO 3
IIIIIIIIIIIIIIIIIIIII
PRESET SAVE
PRESET CLEAR
RETURN
PRESET NOT DEFINED
LENS INIT SETUP
DAY 1
RETURN
English_27