Samsung SCO-2370 User Manual page 19

setup
- USER : Please use this menu item when using
a monitor other than standard ones.
You can change the gamma, PED
level, and color gain in the sub menus.
DISPLAY : Use this feature to designate a
name for the camera, which will display on
the monitor screen.
- CAM TITLE : If the camera is named, it is
displayed on the monitor.
➊ Press the Function Setup switch to display the main
setup menu and move the arrow indicator to 'CAM
TITLE' using the Function Setup switch.
➋ Set 'CAM TITLE' to 'ON' using the Function Setup
switch.
M 
If the CAM TITLE feature is set to 'OFF', the name
will not displayed in the monitor
➌ Press the Function Setup switch.
➍ You can enter up to 15 characters.
a. Move the cursor to the character entry fi eld
using the Function Setup switch.
b. Use the 4 direction of Function Setup Switch
to select a desired character.
c. Press the Function Setup switch to confi rm
the selection of the blinking character. The
character is then saved, and the cursor in the
entry fi eld moves to the next position.
d. Repeat steps 'a' through 'c' until the desired
name has been entered.
36_ setup
USER MONITOR SETUP
GAMMA 0.55
PED LEVEL 17
IIIIIIII IIIIIIIIIIIIIIIIIIIII
COLOR LEVEL 50
IIIIIIIIIIIIIIIII IIIIIIIIIIII
RETURN
SPECIAL SETUP
PRIVACY OFF
DAY/NIGHT AUTO
DIS OFF
SYNC INT
COMM ADJ
IMAGE ADJ
MONITOR LCD
DISPLAY
RETURN
DISPLAY SETUP
CAM TITLE OFF
CAM ID ON
CAM INFO ON
MOTION ALARM OFF
ZOOM MAG ON
FONT COLOR WHITE
LANGUAGE ENGLISH
RETURN
CAMERA TITLE SETUP
A B C D EF G H I J K L M
N O P Q R S T U V WXY Z
a b c d e f g h i j k l m
n o p q r s t u v w x y z
- . 0 1 2 3 4 5 6 7 8 9
← →
CLR POS END
M

Correcting Mistakes
Move the cursor th 'CLR' and press the Function Setup switch to clear the entire entry.
To modify one character, use LEFT or RIGHT to position the cursor above the character to be
modifi ed and click the Function Setup switch after selecting the character to enter.
➎ Enter a title, move the cursor to 'POS' and press
the Function Setup Switch. The entered title
appears on the screen. Select the position to
display the title on the screen by moving the 4
direction of Function Setup Switch and press
the Function Setup Switch. When the position is
determined, select.
- CAM ID : Displays camera ID on top left corner of the screen.
- CAM INFO : Displays camera information on screen.
- MOTION ALARM : You can toggle the use of the camera alarm.
- ZOOM MAG : Use th is feature to display the current zoom magnifi cation level on
screen. Position the indicator over 'ZOOM MAG' using the Function
Setup switch. Then set to ON using the Function Setup switch.
- FONT COLOR : You can select the font color(white,yellow,green,red,blue)
- LANGUAGE : You can select the menu language according to your requirements.
• NTSC : Korean, English, French, Spanish, Japanese, Portuguese,
Taiwanese
• PAL : English, French, German, Spanish, Italian, Chinese, Russian, Czech,
Polish, Portuguese, Romanian, Serbian, Swedish, Danish, Turkish
- END : Select this to save the SPECIAL menu settings and return to the
SPECIAL menu.
RESET
To reset your camera to factory default condition.
EXIT
To finish setup menu.
FRONT DOOR
English_37