Samsung SCO-2370 User Manual page 13

setup
START ZOOM : By moving the Function
Setup switch in the 'SMART ZOOM' item
to select the zoom position from 1x to 37x
to be returned after the 'SMART ZOOM'
action is over.
TARGET ZOOM : Use the Function Setup
switch in the 'TARGET ZOOM' item to
select the zoom position from 1x to 37x to
be used during MOTION DETECTION.
DWELL TIME : Use the Function Setup
switch in the 'DWELL TIME' item to select a time between 5 and 60 seconds
for the dwell time before the zoom is returned to the 'SMART ZOOM' position.
(5,7,10,15,20,30,40,60 sec)
M
Tips on Using the Motion Detection Feature

The feature may not function properly under fl ickering light conditions.

The camera interprets sudden changes in lighting and subsequent change in brightness of an
object as motion.

With the feature enabled, other algorithms may require additional time to operate.

This system does not guarantee prevention of fi re or theft. The manufacturer shall not be held responsible
for any accident or damage incurred.
FOCUS
1. Press the Function Setup switch to access the main setup menu and then position
the indicator over FOCUS using the Function Setup switch.
2. Press the Function Setup switch.
MODE : You can select the most suitable zoom mode. Move the arrow indicator
to 'MODE' using Function Setup switch.
MAIN SETUP
SSDR ON
WHITE BAL ATW
BACKLIGHT OFF
MOTION DET OFF
FOCUS
EXPOSURE
SPECIAL
RESET
EXIT
24_ setup
SMART ZOOM SETUP
START ZOOM X1
TARGET ZOOM X5
DWELL TIME 5 SEC
RETURN
FOCUS SETUP
MODE AUTO
ZOOM TRACK AUTO TRACK
ZOOM SPEED FAST
D-ZOOM OFF
ZOOM POS INIT OFF
USER PRESET OFF
LENS INIT MANUAL
RETURN
- AUTO : Select AUTO and press the
Function Setup switch to confi rm.
Increase or decrease optical zoom
(ZOOM) or digital zoom (D-ZOOM)
positions using the Function Setup
switch while verifying the changes
on screen. Enabling D-ZOOM
(ON) means that digital zoom will
activate once optical zoom ends.
The focus automatically adjusts
when the lens zooms in and out.
- ONE PUSH : Focus is automatically adjusted
just once, after zoom position
is changed. Select 'ONE
PUSH' and the Function Setup
switch to confi rm. Increase or
decrease optical zoom (ZOOM)
or digital zoom (D-ZOOM)
positions using the directional
key of Function Setup Switch
while verifying the changes
on screen. Press the Function
Setup switch once the desired
image quality is obtained.
- MANUAL : Select 'MANUAL' and press
the Function Setup switch to
confi rm. Increase or decrease
optical zoom (ZOOM) or digital
zoom (D-ZOOM) positions
moving directional key of
Function Setup Switch while
verifying the changes on screen.
Press the Function Setup switch
once desired image quality
is obtained. Focus can be
manually adjusted, independent
of moving zoom.
ZOOM POS SETUP
: TELE : WIDE
ZOOM/FOCUS POS SETUP
: TELE : WIDE
← : NEAR → : FAR
ZOOM/FOCUS POS SETUP
: TELE : WIDE
← →
: NEAR : FAR
English_25