Advertisement
Quick Links
Advertisement
Related Manuals for Samsung SCO-6023R
Summary of Contents for Samsung SCO-6023R
- Page 1 High Resolution IR Bullet Camera User Manual SCO-6023R...
- Page 2 Disclaimer Samsung makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.
- Page 3 Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we'll introduce our model description. ■ SCO-6023R SERIES • NTSC MODEL • PAL MODEL SCO-6023RN SCO-6023RP ■ MODEL DESCRIPTION • SCO-6023RX _ SIGNAL SYSTEM •...
- Page 4 safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
- Page 5 9. If this product fails to operate normally, contact the nearest service center. never disassemble or modify this product in any way. (samsung is not liable for problems caused by unauthorized modifications or attempted repair.) 10.
- Page 6 safety information FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : 1) This device may not cause harmful interference, and 2) This device must accept any interference received including interference that may cause undesired operation.
- Page 7 Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus Samsung cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products.
- Page 8 contents INTRODUCTION Features Components and Accessories Component names and functions CONNECTION Connecting to Monitor Connecting to Power Using Coaxial Communications CAMERA OPERATION Menu Configuration Menu Setup TROUBLESHOOTING Troubleshooting SPECIFICATIONS Specifications Dimension 8_ contents...
- Page 9 - Color : 0.45Lux (F2.1, 50IRE); 0.25Lux (F2.1, 30IRE) B/W : 0Lux (IR LED on) y SSNR4 (Samsung Super Noise Reduction) Function High performance NVP2440H Chip removes noises of GAIN resulting from the low light level and shows a vivid, high definition video even in the dark place.
- Page 10 COMPONENTS AND ACCESSORIES Check if the following items are included in the product package. High Resolution IR Bullet Camera User Manual SCO-6023R SCO-6083R SCO-6083R SCO-6023R Quick Manual Screws Template 10_ introduction...
- Page 11 COMPONENT NAMES AND FUNCTIONS Front ➍ Camera Sunshield Knob Sunshield : Fixing the sunshield onto the camera. Function Setup Switch : Display the menu on the screen and move the cursor to four directions to confirm status or after changing a selected item. Front cover ➍...
- Page 12 introduction Back ➎ ➏ Video output jack : Video signals are output through this port. Connect this port to the Video ➎ IN port of a AHD DVR. Power input terminal : Connect the designated power supplies. ➏ 12_ introduction...
- Page 13 CONNECTING TO MONITOR Please connect the Video output jack located on the back of the camera to the AHD DVR. SCO-6023R AHD DVR Monitor y As the connecting method varies with the instruments, refer to the manual supplied with the instrument.
- Page 14 connection When the resistance value of copper wire is at [20°C(68°F)] Copper wire size (AWG) #24 (0.22mm #22 (0.33mm #20 (0.52mm #18 (0.83mm Resistance value(Ω/m) 0.078 0.050 0.030 0.018 Voltage Drop (V/m) 0.028 0.018 0.011 0.006 y As shown in the table above, voltage decreases as the wire gets longer. Therefore use of an excessively long adaptor output line for connection to the camera may affect the performance of the camera.
- Page 15 - Video Cable The camera's video output port is connected to the DVR with a BNC coaxial cable, shown below. Recommended Cable Distance Specification 500m 75-5 Coaxial Cable It is recommended that pure copper coax cable is used and not copper coated steel, as this will cause issues with the communication over the coaxial cable.
- Page 16 camera operation MENU CONFIGURATION MAIN SETUP BASIC DAY/NIGHT BACKLIGHT ● ● ● PROFILE INDOOR USER ● ● ● D-WDR ● ● OUTDOOR INDOOR ● ● ● WHITE BAL ● AWC SET MANUAL ● BRIGHTNESS SHUTTER ● ● ● EXPOSURE SSNR4 RETURN ●...
- Page 17 MAIN SETUP Select the function 1. PROFILE BASIC Change the status using the Function using the Function 2. D-WDR Setup switch. Setup switch. 3. WHITE BAL 4. EXPOSURE 5. BACKLIGHT 6. SPECIAL 7. EXIT SAVE 1. Press the Function Setup switch. y Main SETUP menu is displayed on the monitor screen.
- Page 18 camera operation y INDOOR : It will be set automatically to help you take a picture in a regular indoor lighting condition. y USER : Automatically configures the camera to your custom settings. 1) Select Custom for Simple Setup mode. 2) Configure the menu options to your custom settings.
- Page 19 In D-WDR mode, there can be noise between a bright and dark area. Depending on light conditions, unnatural changes or symptoms can occur on the screen so deactivate the user mode. White Bal (White Balance) Use the White Balance function to adjust the screen color. 1.
- Page 20 camera operation White Balance may not work properly under the following conditions. In this case select the AWC mode. Select this When the color temperature of environment surrounding the subject is out of the control range (e.g. clear sky, or sunset) When the ambient illumination of the subject is dim.
- Page 21 When adjusting the noise reduction level in the SSNR4 mode, remember that the higher the level set, the more the noise level will be reduced, as will the brightness of the image. BACKLIGHT The camera uses our own NVP2440H chips that are designed to clearly display the object and the background despite severe reverse light.
- Page 22 camera operation SPECIAL 1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Function Setup switch so that the arrow indicates ‘SPECIAL’. 2. Select a desired mode using the Function Setup switch. y DISPLAY ❶M If the SPECIAL menu screen is SPECIAL SETUP displayed, use the Function Setup ...
- Page 23 If you move the cursor to CLR and press the Function Setup switch, all the letters are deleted. To edit a letter, change the cursor to the bottom left arrow and press the Function Setup switch. Move the cursor over the letter to be edited, move the cursor to the letter to be inserted and then press the Function Setup switch.
- Page 24 camera operation y VIDEO OUTPUT ❶M If the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow indicates ‘VIDEO OUTPUT’. ❷MM S elect a desired mode using the Function Setup switch. - HD : HD Video resolution(1920X1080) - SD : SD Video resolution Please exit the menu and hold the “function setup switch”...
- Page 25 y DEFOG : You can use the defog mode to allow the camera to automatically detect the fog density of the screen and display a clear image despite smog, fog or general poor visibility. ❶MM I f the SPECIAL menu screen is DEFOG displayed, use the Function Setup ...
- Page 26 camera operation y MOTION : This product generates signals each time an object movement is detected in the four areas of the screen so efficient monitoring can be achieved. ❶MM I f the SPECIAL menu screen MOTION DET is displayed, use the Function ...
- Page 27 - If more than one objects merge or one object divides into multiple objects - If an object moves too fast (the same object should have overlapping areas between the consecutive frames) - If there are reflections/blurs/shadows created by a strong light such as direct sunlight, lights, and headlights.
- Page 28 troubleshooting TROUBLESHOOTING If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. Problems Troubleshooting Nothing appears on the screen. y Check that the power cord and line connection between the camera and AHD DVR are properly connected.
- Page 29 specifications SPECIFICATIONS SCO-6023RN SCO-6023RP Video 1/2.9” 2M CMOS Imaging Device 2,000(H) x 1,121(V) 2.24M pixels Total Pixels Effective Pixels 1,984(H) x 1,105(V) 2.19M pixels Scanning System Progressive Scan Horizontal Resolution 1000TVL Color : 0.45Lux (F2.1, 50IRE); 0.25Lux (F2.1, 30IRE) Min. Illumination B/W : 0Lux(IR LED on) 52dB (AGC off, Weight on) S / N Ratio...
- Page 30 specifications SCO-6023RN SCO-6023RP Motion Detection Off / On(4 zones) Privacy Masking Off / On (4 zones rectangle) Gain Control Off / Low / Middle / High / Very High White Balance ATW / Outdoor / Indoor / Manual / AWC(1,800K ~ 10,500K) Electronic Shutter 1 sec ~ 1/12,000 sec Speed...
- Page 31 DIMENSION Unit: mm(inch) English_31...
- Page 32 MEMO...
- Page 33 6, Pangyo-ro 319beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, SEOUL 463-400 Rep. of KOREA Tel : +82-70-7147-8753, 8764 Fax : +82-31-8018-3740 www.samsungsecurity.com SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 2nd Floor, No. 5 The Heights, Brooklands, Weybridge, Surrey,...