Connecting To Monitor - Samsung SCO-2370 User Manual

introduction
COMPONENT NAMES AND FUNCTIONS
Heater & Fan
This product is equipped with a built-in heater & fan that helps maintaining operational
temperature and humidity.
Front cover
1. While powered, the heater & fan operates according to the camera's internal temperature.
Check heater & fan operation with given internal temperature by referring to the below:
While the camera is powered, the heater & fan operates if its internal temperature drops
below -10 °C. When the camera's internal temperature reaches -5 °C, the heater & fan
stops operating.
While the camera is powered and its internal temperature is between -50 °C ~ -15 °C,
the message "Low Temperature Wait" appears. When it reaches -15 °C, the camera is
initialized and video begins output.
When the camera's internal temperature reaches 40 °C, the fan starts operating.
If the camera's internal temperature reaches 80 °C, it will be initialized.

M
Be careful not to touch the heater while installing if the ambient temperature is below than -10°C,
since the heater may operate immediately after applying the power.

If the front cover is cross threaded or not correctly tightened the camera housing will not be weatherproof.

When you combine the front cover, combine the triangle of front cover and triangle of main body
confront each other.
12_ introduction
Fan
Heater
installation & connection

CONNECTING TO MONITOR

Please connect the video output terminal located on the back of the camera to the monitor.
CCD Camera
The connection method varies depending on the type of monitor and accessories.Please
refer to the user's manual for each instrument.
Please turn off the power when connecting.
Monitor
English_13