Atomizing Cap And Fan Adjustments - Grizzly H8115 Owner's Manual

Atomizing Cap and
Fan Adjustments
The atomizing cap needs to be adjusted
for horizontal (Figure 7 & 8) or verti-
cal (Figure 9 & 10) spraying patterns.
Spraying in the opposite direction may
lead to material build up on the atomizing
cap horn. Many performance problems
are caused by clogged atomizing holes on
the atomizing cap horns (see Cleaning on
Page 15).
Holes
Stroke
Figure 7. Set up for horizontal stroke,
Model H8115.
Holes
Stroke
Figure 8. Set up for horizontal stroke,
Model H8117.
Model H8115/H8117 Spray Gun
Stroke
Figure 9. Set up for vertical spray stroke,
Model H8115.
Stroke
Figure 10. Set up for vertical spray stroke,
Model H8117.
Rotating the pattern adjustment control
in Figure 9 or 10 will give you a range
between the two patterns in Figure 11.
5 /
29
6"-8"
Figure 11. Fan adjustment, Model H8115.
Pattern Control
Pattern Control
"
32
-13-