Atomizing Cap And Fan Adjustments - Grizzly H7673 Instruction Manual

Atomizing Cap and
Fan Adjustments
The atomizing cap needs to be adjusted
for horizontal or vertical spraying patterns.
Spraying in the wrong direction may lead
to material build up on the atomizing cap
horn. Many performance problems are
caused by clogged atomizing holes on the
atomizing cap horns (see Cleaning on
Page 13).
Holes
Stroke
Figure 6. Set up for horizontal stroke
direction with vertical fan pattern.
-12
-
Stroke
Figure 7. Set up for vertical spray stroke
with horizontal fan pattern.
Rotating the pattern adjustment control in
Figure 7 will give you a range between the
two patterns in Figure 8.
190 mm
Figure 8. Fan adjustment.
Model H7673 HVLP Spray Gun
Pattern Control