Additional Safety Instructions For Spray Guns - Grizzly H8115 Owner's Manual

Additional Safety Instructions for Spray Guns

1. READ THIS MANUAL. This manual
contains proper operating instruc-
tions for this spray gun.
2. READ MATERIAL
and MATERIAL SAFETY DATA
SHEETS (MSDS). Read and know
all the instructions on the packag-
ing label and the MSDS specific
to the material you intend to apply
before opening the package. This
information could save your life.
3. RESPIRATORY
Always wear a NIOSH approved
respirator when spraying or work-
ing around finishing materials.
4. FIRE EXTINGUISHERS. Always
have a fully charged multi class
or class B fire extinguisher in the
immediate area.
5. FLAMMABLE MATERIAL. NEVER
spray near open flame or where
any spark could occur.
6. FRESH AIR. Always provide ade-
quate exhaust to keep area free of
built up vapors, NEVER spray in an
unventilated area.
7. DISCONNECT
AIR. Always disconnect the spray
gun from compressed air before
cleaning, changing attachments or
when performing maintenance of
any kind on this tool.
-6-
LABELS
PROTECTION.
COMPRESSED
8. PROTECTIVE CLOTHING. Protect
exposed skin from overspray by
wearing a protective suit or other
approved garment.
9. INAPPROPRIATE USE. DO NOT
point or shoot spray gun directly
at yourself or another person or
animals. Do not attempt to use the
spray gun for any other use than it
was intended.
10. STORAGE. Thoroughly clean and
dry spray gun before storage. Store
in an approved cabinet.
11. SOLVENTS. Always store solvents
and shop towels soaked in solvent
in approved containers.
12. EYE PROTECTION. Wear eye pro-
tection whenever spraying or clean-
ing. Solvents and chemicals can
cause serious eye injury, which
could lead to blindness.
13. OPERATING
NOT exceed the recommended
inlet air pressure. Excessive pres-
sure could cause the spray gun to
blow seals or cause other internal
equipment damage.
14. LOCAL LAWS.
authorities regarding exhaust and
waste disposal requirements.
Model H8115/H8117 Spray Gun
PRESSURE.
DO
Consult local